2014 Chevrolet Spark Owner Manual - Page 119

Instruments and Controls When the remaining oil life is low, the Code 82 message, or : % CHANGE, will appear on the display. The oil should be changed as soon as possible. See Engine Oil on page 10-7. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. See Maintenance Schedule on page 11-2. Remember, the oil life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the oil life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, see Engine Oil Life System on page 10-9. Units Press SET/CLR and move w or x to change units when UNIT is displayed. Select 1, 2, or 3 for the unit display. 1 is Imperial units, 2 is US units, and 3 is metric units. Press and hold SET/CLR to confirm the setting. The number will flash. This will change the displays on the cluster and DIC to the type of measurements selected. Tire Learn This display allows for matching of the TPMS sensors. See Tire Pressure Monitor System on page 10-43 and Tire Pressure Monitor Operation on page 10-44. 5-25 Vehicle Messages DIC messages display when the status of the vehicle has changed and action may be needed to correct the condition. Multiple messages appear one after another. All messages should be taken seriously. Vehicle messages appear as code numbers. The owner manual indicator and service vehicle soon light may also be displayed. The following is a list of all possible messages. Depending on the vehicle, some of these messages may not be available. 10: Brakes Overheated 15: Check High Mounted Brake Lamp 16: Check Brake Lamps 17: Headlamp Leveling Malfunction - Contact Service 18: Left Low Beam Failure 20: Right Low Beam Failure