2014 Chevrolet Spark Owner Manual - Page 281

Vehicle Care 4. Tire Sealant Canister 5. On/Off Button 6. Slot on Top of Compressor 7. Pressure Gauge Check the tire sealant expiration date on the tire sealant canister. The tire sealant canister (4) should be replaced before its expiration date. Replacement tire sealant canisters are available at your local dealer. There is only enough sealant to seal one tire. After usage, the tire sealant canister must be replaced. 10-57 See If a Tire Goes Flat on page 10-54 for other important safety warnings. Do not remove any objects that have penetrated the tire. 1. Remove the tire sealant canister (4) and compressor from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10-63. 2. Remove the air only hose (10) and the power plug (9) from the bottom of the compressor. 3. Place the compressor on the ground near the flat tire. Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire When using the tire sealant and compressor kit during cold temperatures, warm the kit in a heated environment for five minutes. This will help to inflate the tire faster. If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 6-3. 8. Pressure Deflation Button 9. Power Plug 10. Air Only Hose Tire Sealant Read and follow the safe handling instructions on the label adhered to the tire sealant canister (4).