2014 Chevrolet Spark Owner Manual - Page 250

10-26 Vehicle Care 5. Install the socket into the lamp housing by turning it clockwise. Front Turn Signal/Parking Lamps To replace a front turn signal bulb: 1. Open the hood. See Hood on page 10-4. Fog Lamps To replace the front fog lamp bulb: 1. Locate the fog lamp under the front fascia. 2. Disconnect the electrical connector from the fog lamp bulb assembly. 3. Remove the bulb by turning it counterclockwise and pulling it straight out of the assembly. 4. Install the new bulb by turning it clockwise into the assembly. 5. Reverse Steps 1-3 to reinstall. Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps 1. Stoplamp/Taillamp 2. Turn Signal Lamp/Taillamp 3. Back-up Lamp To replace a taillamp, turn signal lamp, stoplamp, or back-up bulb: 1. Open the liftgate. See Liftgate on page 2-8. 2. Turn the bulb socket counterclockwise and pull it out of the lamp housing. 3. Pull the bulb straight out of the bulb socket. 4. Install the new bulb into the socket by pressing it in.