2014 Chevrolet Spark Owner Manual - Page 271

Vehicle Care 10. Proceed to the driver side rear tire, and repeat the procedure in Step 7. The horn sounds two times to indicate the sensor identification code has been matched to the driver side rear tire, and the TPMS sensor matching process is no longer active. The TIRE LEARN message on the DIC display screen goes off. 11. Turn the ignition to LOCK/OFF. 12. Set all four tires to the recommended air pressure level as indicated on the Tire and Loading Information label. . 10-47 Replace the tire if: . Tire Rotation Tires should be rotated every 12 000 km (7,500 mi). The first rotation is the most important. See Maintenance Schedule on page 11-2. Tires are rotated to achieve a more uniform wear for all tires. Anytime unusual wear is noticed, rotate the tires as soon as possible, check for proper tire inflation pressure, and check for damaged tires or wheels. If the unusual wear continues after the rotation, check the wheel alignment. See When It Is Time for New Tires on page 10-48 and Wheel Replacement on page 10-53. The indicators at three or more places around the tire can be seen. There is cord or fabric showing through the tire's rubber. The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric. The tire has a bump, bulge, or split. The tire has a puncture, cut, or other damage that cannot be repaired well because of the size or location of the damage. . . . Tire Inspection We recommend that the tires, including the spare tire, if the vehicle has one, be inspected for signs of wear or damage at least once a month.