2014 Chevrolet Spark Owner Manual - Page 249

Vehicle Care 10-25 Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 10-28. For any bulb‐changing procedure not listed in this section, contact your dealer. Headlamps, Front Turn Signal and Parking Lamps High/Low-Beam Headlamp To replace a headlamp bulb: 1. Open the hood. See Hood on page 10-4. 2. Remove the connector retaining tab (1). 3. Disconnect the wiring harness connector from the bulb (3) by pressing the connector release (2) and pulling straight back. 4. Remove the bulb (3) from the headlamp assembly by turning counterclockwise and pulling straight back. 5. Install the new bulb in the headlamp assembly by turning clockwise. 6. Install the wiring harness connector to the bulb. Be sure the connector release (2) locks into place. 7. Install the connector retaining tab (1). Halogen Bulbs { Warning Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package. 1. Connector Retaining Tab 2. Connector Release 3. Headlamp Bulb