2014 Chevrolet Spark Owner Manual - Page 52

3-14 Seats and Restraints To install the adjustable comfort guide to the seatback and the safety belt: 3. Place the guide over the belt, and insert the two edges of the belt into the slots of the guide. 1. Locate the anchor loop on the rear outboard seatback, near the top. 2. Attach the adjustable comfort guide to the anchor loop by threading the hook through the loop. 4. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. 5. The elastic cord on the comfort guide is adjustable. You can make it longer or shorter by squeezing both ends of the plastic adjuster and pulling on the elastic cord or the guide. 6. Adjust the guide so the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck.