2014 Chevrolet Spark Owner Manual - Page 216

9-32 Driving and Operating Warning (Continued) screen, during longer, higher speed backing maneuvers, or where there could be cross traffic. Failure to use proper care before backing may result in injury, death, or vehicle damage. Always check behind and around the vehicle before backing. Turning the Rear Vision Camera System On or Off To turn the RVC system on or off: 1. Shift into P (Park). 2. Press the CONFIG button on the infotainment system. 3. Select Display. 4. Select Camera. When a checkmark appears next to Camera, then the RVC system is on. Guidelines The RVC system may have a guideline overlay that can help the driver align the vehicle when backing into a parking spot. To turn the guidelines on or off: 1. Shift into P (Park). 2. Press the CONFIG button on the infotainment system. 3. Select Display. Driver Assistance Systems Rear Vision Camera (RVC) The vehicle may have an RVC system. Read this entire section before using it. The RVC system can assist the driver when backing up by displaying a view of the area behind the vehicle. How the System Works When the vehicle is shifted into R (Reverse), the image of the area behind the vehicle appears in the radio screen. The previous screen displays when the vehicle is shifted out of R (Reverse) after approximately 2 seconds. To see the previous screen sooner, do one of the following: . { Warning The RVC system does not display children, pedestrians, bicyclists, animals, or any other object located outside the camera's field of view, below the bumper, or under the vehicle. Perceived distances may be different from actual distances. Do not back the vehicle using only the RVC (Continued) Press a button on the infotainment system. Shift into P (Park). .