2014 Chevrolet Spark Owner Manual - Page 46

3-8 Seats and Restraints { Warning With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly. To return the rear seats to the normal seating position: 1. Insert the safety belt latch plate into the hole on the side trim before raising the seatback. The safety belt should not cross the seatback locking mechanism when raising the seatback. 2. Lift the seatback up slightly and reinstall the head restraint. See "Head Restraint Removal and Reinstallation" under Lower Anchors and Tethers for Children (LATCH System) on page 3-38. 3. Push the seatback rearward all the way to lock it in place. 4. Push and pull the top of the seatback to be sure it is locked into position. 5. Return the seat cushion to its original position and push down on the front part of the seat cushion until it latches. 6. Remove the safety belt from the hole on the side trim. 7. Repeat Steps 1-6 for the other seatback and seat cushion, if necessary. If added cargo space is not needed, the seatbacks should be kept in the upright, locked position