2005 Chrysler Crossfire Owner Manual SRT6 - Page 112
2005 Chrysler Crossfire Manual
Page 112 highlights
112 UNDERSTANDING YOUR INSTRUMENT PANEL • Treble (TREB) Press the AUD button repeatedly until TREB appears. Rotate the right rotary control for the desired level (from -9 to +9). • Balance (BAL) Press the AUD button repeatedly until BAL appears. Rotate the right rotary control for the desired level (from -9 to +9). • Linear adjustment (LINEAR) The tone values for the set signal source (e.g., radio/ FM) are set to "0" (mean value). Press and hold the AUD button for more than 4 seconds until FM LINEAR appears (which affects FM only). Press and hold the AUD button for more than eight seconds until ALL LINEAR appears (which affects both radio and CD). • Mute function (MUTE) To activate the mute function in all modes and wavebands, press the TP button. The mute function is cancelled by either pressing the TP button again, or by turning the volume control. NOTE: After six seconds without any action, or by pressing OPT, CD, AM, FM, or TP, the current setting is cancelled, and the new setting is stored. FM1 - FM2 - FM AS - BEST FM The system has four FM memory modes that can be selected by repeatedly pressing the FM button. FM1 - One of ten memorized FM station frequencies can be selected by pressing a multifunction button. FM2 - A second set of ten memorized FM station frequencies can be selected by pressing a multifunction button. FM AS - An autostore feature will store the 9 current stations with the strongest signal on station buttons 1-9 in the order of their signal quality. Press the FM button repeatedly until FM AS is displayed to perform an autostore scan. Press the multifunction button labeled AS repeatedly until AS-SEEK is displayed. To select the stored stations, press the 1-9 buttons.