2005 Chrysler Crossfire Owner Manual SRT6 - Page 113

UNDERSTANDING YOUR INSTRUMENT PANEL 113 BEST FM - The BEST FM function automatically memorizes and continuously updates the frequencies of stations in order of their signal strength. The strongest station comes up first when BEST FM is selected. Stations with stronger or weaker signals are selected by turning the right rotary knob. To select the displayed station, press the right rotary control/push button. Tuning FM stations - Rotating the right rotary control to the right or left will change the FM frequency to the next higher or lower station with a strong signal. To manually step through each frequency or tune in a station with a weaker signal, press the MAN button first, and then rotate the rotary control right or left. Storing FM stations - 10 frequencies can be stored on FM 1 and on FM 2 by pressing a multifunction button for three seconds; a tone will confirm that the selection was set. Scan Search FM (SC) - To activate, press the right rotary control/push button until SC is displayed. Beginning with the currently set frequency, the next station scanned will be heard for eight seconds. Press the right rotary control/push button if you wish to keep the current station. Once the scan begins, it will continue until either a station or program is retained or until another mode is selected. Radio Data System (RDS) Stations PTY (Program Type) The program type of the selected station can be displayed for 10 seconds, or scanned in order of ascending frequency for eight seconds each. To activate, press the OPT button in FM mode, then press the multifunction PT button. You can pre-select one of the currently available PTY by turning the right rotary control/push button and the program type scan search begins. Press the button again to keep the received program. If the selected station does not transmit a PTY identification, the display will show NO PTY. If all criteria for evaluating RDS are not met, the unit will only display the frequency. 4