2005 Chrysler Crossfire Owner Manual SRT6 - Page 138

138 STARTING AND OPERATING 4. Wait approximately 10 seconds. 5. Restart the engine. 6. Move the selector lever to the DRIVE position (for SECOND gear), or move the selector lever to the REVERSE position (for REVERSE gear). Have the transmission checked at your authorized dealer as soon as possible. PARKING BRAKE When you apply the parking brake with engine running, the brake system warning light in the instrument cluster will come on. NOTE: This light, when illuminated with parking brake application, shows only that the parking brake is on. It does not show the degree of brake application. NOTE: If the light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. Before leaving the vehicle, make sure that the parking brake is fully applied and place the gear selector in the PARK position. To release the parking brake, slightly pull up the handle while pushing the lock button, and guide the lever downward to its stop. The brake warning light in the instrument cluster should go out. A warning sounds if you start to drive without having released the parking brake.