2005 Chrysler Crossfire Owner Manual SRT6 - Page 143

STARTING AND OPERATING 143 Synchronizing ESP If the power supply was interrupted (battery disconnected or discharged), the BAS/ESP malfunction indicator light may be illuminated with the engine running. To re-synchronize the ESP, and cancel the malfunction indicator light, the steering angle sensor will need to be recalibrated. 1. Turn the ignition switch to the ON/RUN position. 2. Rotate the steering wheel to the center position. 3. Rotate the steering wheel completely to the left, and then rotate the steering wheel completely to the right. 4. Bring the steering wheel back to the center position. 5. The BAS/ESP malfunction indicator light will go out. If the BAS/ESP malfunction indicator light is still illuminated, the vehicle should be serviced at an authorized dealer. ESP Control switch The ESP control switch is located in the center console. When the ESP is switched off, the warning light in the instrument cluster comes on. When the ESP is switched on, the warning light goes out. 5 To improve the vehicle's traction when driving with snow chains, or starting off in deep snow, sand, or gravel, switch off the ESP by pressing the upper half of the ESP switch. The ESP warning light will then be continuously