2009 Chrysler Town & Country Owner Manual - Page 188

186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beam headlights until the lever is released. SmartBeams - If Equipped The SmartBeam system provides increased forward lighting at night by automating high beam control through the use of a digital camera mounted on the inside rearview mirror. This camera detects vehicle specific light and automatically switches from high beams to low beams until the approaching vehicle is out of view. To Activate 2. Rotate the headlight switch counterclockwise to the AUTO (A) position. 3. Push the multifunction lever away from you to switch the headlights to the high beam position. Refer to "Multifunction Lever" in this section. NOTE: This system will not activate until the vehicle is at, or above, 25 mph (40 km/h). To Deactivate Perform either of the following steps to deactivate the SmartBeam system. 1. Pull the multifunction lever toward you to switch the headlights from the high beam to the low beam position. 1. Select "Automatic High Beams - ON" through the 2. Rotate the headlight switch clockwise from the AUTO EVIC. Refer to "Automatic High Beams," "Personal (A) to the on position. Settings (Customer- Programmable Features)" under NOTE: Broken, muddy or obstructed headlights and "Electronic Vehicle Information Center" in Section 4. taillights of vehicles in the field of view will cause