2009 Chrysler Town & Country Owner Manual - Page 27

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Turn Off Flash Lights with RKE Lock - If Equipped This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: 2. Press and hold the UNLOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 3. Release both buttons at the same time. 2 4. Test the feature while outside of the vehicle by press• For vehicles equipped with the EVIC, refer to "Flash ing the LOCK/UNLOCK buttons on the RKE transmitter Light With Lock," under Personal Settings (Customerwith the ignition switch in the LOCK position and the Programmable Features)," under "Electronic Vehicle key removed. Information Center (EVIC)" in Section 4. 5. Repeat these steps if you want to return this feature to • For vehicles not equipped with the EVIC, perform the its previous setting. following steps: NOTE: Pressing the LOCK button on the RKE transmit1. Perform this operation while standing outside the ter while you are in the vehicle will activate the Vehicle vehicle. Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm.