2009 Chrysler Town & Country Owner Manual - Page 460

458 MAINTAINING YOUR VEHICLE Cooling System - Drain, Flush and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze) solution. Refer to the "Maintenance Schedule" in Section 8 for the proper maintenance intervals. Selection of Coolant Use only the manufacturer's recommended engine coolant (antifreeze). Refer to "Fluids, Lubricants and Genuine Parts" in this section for the correct fluid type. CAUTION! • Mixing of engine coolant (antifreeze) other than specified Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. If a non-HOAT engine coolant (antifreeze) is introduced into the cooling system in an emergency, it should be replaced with the specified engine coolant (antifreeze) as soon as possible. • Do not use water alone or alcohol based engine coolant (antifreeze) products. Do not use additional rust inhibitors or anti-rust products, as they may not be compatible with the radiator engine coolant (antifreeze) and may plug the radiator. (Continued)