2009 Chrysler Town & Country Owner Manual - Page 258
2009 Chrysler Town & Country Manual
Page 258 highlights
256 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: When this message is displayed, bring the instrument cluster. To reset the oil change indicator vehicle to a stop and idle the engine until the message system (after performing the scheduled maintenance), perform the following steps. clears. CHAngE OIL Your vehicle is equipped with an engine oil change indicator system. The CHAngE OIL message will flash in the instrument cluster odometer for approximately 12 seconds, after a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle-based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. 1. Turn the ignition switch to the ON position (do not start the engine). 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Turn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the engine, the oil change indicator system did not reset. If necessary, repeat these steps. Unless reset, this message will continue to display each 25. Odometer time you turn the ignition switch to the ON/RUN The odometer shows the total distance the vehicle has position. To turn off the message temporarily, press and been driven. release the Trip / Odometer Display reset button on the U.S. federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the