2009 Chrysler Town & Country Owner Manual - Page 254

252 UNDERSTANDING YOUR INSTRUMENT PANEL 19. Malfunction Indicator Light (MIL) 16. High Beam Indicator This indicator shows that the high beam headThe Malfunction Indicator Light (MIL) is part of an onboard diagnostic system, called OBD, that lights are on. Push the multifunction lever forward monitors engine and automatic transmission conto switch the headlights to high beam, and pull toward trol systems. The light will illuminate when the key is in yourself (normal position) to return to low beam. the ON position, before engine start. If the bulb does not 17. Front Fog Light Indicator - If Equipped come on when turning the key from OFF to ON, have the This indicator will illuminate when the front fog condition checked promptly. lights are on. Certain conditions such as a loose or missing gas cap, 18. Seat Belt Reminder Light poor fuel quality, etc., may illuminate the MIL after When the ignition switch is first turned ON, this engine start. The vehicle should be serviced if the light light will turn on for five to eight seconds as a bulb stays on through several of your typical driving cycles. In check. During the bulb check, if the driver's seat most situations, the vehicle will drive normally and will belt is unbuckled, a chime will sound. After the bulb not require towing. check or when driving, if the driver's seat belt remains unbuckled, the Seat Belt Reminder Light will illuminate If the MIL flashes when the engine is running, serious and the chime will sound. Refer to "Occupant Restraints" conditions may exist that could lead to immediate loss of power or severe catalytic converter damage. The vehicle in Section 2 for more information. should be serviced as soon as possible if this occurs.