2009 Chrysler Town & Country Owner Manual - Page 197

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 speed memory. Pushing the ON/OFF button to the OFF To decrease speed while speed control is set, press the position or turning OFF the ignition erases the set speed SET/DECEL lever downward, and hold. Release the Electronic Speed Control lever when the desired speed is memory. reached, and the new speed will be set. Resuming Speed To resume a previously set speed, raise the Electronic Tapping the SET/DECEL lever downward, once, will Speed Control lever (RESUME/ACCEL) upward, and result in a 1 mph (1.6 km/h) speed decrease. Each time release. Resume can be used at any speed above 25 mph the Electronic Speed Control lever is tapped downward, speed decreases. (40 km/h). Varying The Speed Setting When the Electronic Speed Control is set, speed can be increased by raising and holding the RESUME/ACCEL lever upwards. When released, a new set speed will be established. Accelerating To Pass Press the accelerator as you normally would. When the pedal is released, the vehicle will return to the set speed. 3 NOTE: The Electronic Speed Control system maintains speed up and down hills. A slight speed change on Raising the RESUME/ACCEL lever upward, once, will moderate hills is normal. result in a 1 mph (1.6 km/h) speed increase. Each time the lever is tapped upward speed increases, so tapping the Electronic Speed Control lever three times will increase speed by 3 mph (5 km/h), etc.