2009 Chrysler Town & Country Owner Manual - Page 475

MAINTAINING YOUR VEHICLE 473 Soak the liner in a mixture of medium hot tap water and one teaspoon of mild liquid dish soap. Let soak for approximately 30 minutes. After 30 minutes, pull the liner from the water and dip it back into the water about six times. This will loosen any remaining debris. Rinse If the seat belts need cleaning, use a mild soap solution or the liner thoroughly under warm running water. Shake lukewarm water. Do not remove the belts from the car to the excess water from the liner and dry the outer surfaces wash them. with a clean soft cloth. Replace the seat belts if they appear frayed or worn, or if Installation the buckles do not work properly. Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the Cleaning the Instrument Panel Cupholders corresponding openings in the drawer. Removal Pull the flexible liner from the cupholder drawer starting FUSES at one edge to ease removal. Totally Integrated Power Module (TIPM) Cleaning The Totally Integrated Power Module (TIPM) is located The liner is top shelf dishwasher safe, or you may follow in the engine compartment near the battery. Refer to the the cleaning procedure below. applicable "Engine Compartment" illustration in this Seat Belt Maintenance Do not bleach, dye or clean the seat belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. 7