2015 Dodge Charger Owner Manual - Page 146

144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a 1. memory profile. 2. • To set a memory profile to your RKE transmitter, refer to "Linking And Unlinking The Remote Keyless Entry Transmitter To Memory" in this section. Linking And Unlinking The Remote Keyless Entry Transmitter To Memory To program your RKE transmitters, perform the following: Place the vehicles ignition to the OFF position. Select desired memory profile (1) or (2). The system will recall any stored settings for this profile. Wait for the system to complete the memory recall before continuing to Step 3. NOTE: If a memory profile has not already been set, refer to ЉProgramming The Memory FeatureЉ in this Your RKE transmitters can be programmed to recall one section for instructions on how to set a memory profile. of two pre-programmed memory profiles by pressing the 3. Once the profile has been recalled, press and release UNLOCK button on the RKE transmitter. the SET (S) button on the memory switch, then press and release button (1) or (2) accordingly. "Memory NOTE: Before programming your RKE transmitters you Profile Set" (1 or 2) will display in the Drivers Informust select the "Memory To FOB" or "Personal Settings mation Display (DID). Linked To Fob" feature through the Uconnect® system screen. Refer to "Uconnect® Settings" in "Understanding 4. Press and release the LOCK button on the RKE Your Instrument Panel" for further information. transmitter within 10 seconds.