2015 Dodge Charger Owner Manual - Page 55

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 5. Position the shoulder belt across the shoulder and 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of chest with minimal, if any slack so that it is comfortthe latch plate. able and not resting on your neck. The retractor will withdraw any slack in the shoulder belt. 4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted. 6. To release the belt, push the red button on the buckle. The seat belt will automatically retract to its stowed Adjustable Upper Shoulder Belt Anchorage position. If necessary, slide the latch plate down the In the driver and front passenger seats, the top of the webbing to allow the seat belt to retract fully. shoulder belt can be adjusted upward or downward to Lap/Shoulder Belt Untwisting Procedure position the seat belt away from your neck. Push or Use the following procedure to untwist a twisted lap/ squeeze the anchorage button to release the anchorage, shoulder belt. and move it up or down to the position that serves you best. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180° to create a fold that begins immediately above the latch plate. 2