2015 Dodge Charger Owner Manual - Page 459

STARTING AND OPERATING 457 Chrysler Specification MS-6395. The manufacturer only recommends engine oils that are API Certified and meet • Use seasonally adjusted E-85 fuel (ASTM D5798). With the requirements of Material Standard MS-6395. MS-6395 non-seasonally adjusted E-85 fuel, you may experience contains additional requirements, developed during exhard starting and rough idle following start up even if tensive fleet testing, to provide additional protection to the above recommendations are followed, especially Chrysler Group LLC engines. Use MOPAR® or an when the ambient temperature is below 32°F (0°C). equivalent oil meeting the specification MS-6395. • Some additives used in regular gasoline are not fully Starting compatible with E-85 and may form deposits in your engine. To eliminate driveability issues that may be The characteristics of E-85 fuel make it unsuitable for use caused by these deposits, a supplemental gasoline when ambient temperatures fall below 0°F (-18°C). In the additive, such as MOPAR® Injector Cleanup or range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and Techron may be used. a deterioration in driveability (sags and/or hesitations) Selection Of Engine Oil For Flexible Fuel Vehicles until the engine is fully warmed up. (E-85) And Gasoline Vehicles NOTE: Use of the engine block heater (if equipped) is FFV vehicles operated on E-85 require specially formubeneficial for E-85 startability when the ambient temperalated engine oils. These special requirements are included ture is less than 32°F (0°C). in MOPAR® engine oils, and in equivalent oils meeting NOTE: 5