2015 Dodge Charger Owner Manual - Page 543

MAINTAINING YOUR VEHICLE 541 miles (240,000 km) before replacement. To prevent reduc- • Use only high purity water such as distilled or deioning this extended maintenance period, it is important that ized water when mixing the water/engine coolant you use the same engine coolant (OAT coolant conform(antifreeze) solution. The use of lower quality water ing to MS.90032) throughout the life of your vehicle. will reduce the amount of corrosion protection in the engine cooling system. Please review these recommendations for using Organic Additive Technology (OAT) engine coolant (antifreeze) Please note that it is the owner's responsibility to mainthat meets the requirements of Chrysler Material Stan- tain the proper level of protection against freezing acdard MS.90032. When adding engine coolant (antifreeze): cording to the temperatures occurring in the area where the vehicle is operated. • We recommend using MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive NOTE: Technology) that meets the requirements of Chrysler • Some vehicles require special tools to add coolant Material Standard MS.90032. properly. Failure to fill these systems properly could • Mix a minimum solution of 50% OAT engine coolant lead to severe internal engine damage. If any coolant is that meets the requirements of Chrysler Material Stanneeded to be added to the system please contact your dard MS.90032 and distilled water. Use higher concenlocal authorized dealer. trations (not to exceed 70%) if temperatures below −34° F (−37° C) are anticipated. 7