2015 Dodge Charger Owner Manual - Page 214

212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® will retain the last system state (enabled or ParkSense® Warning Display disabled) from the last ignition cycle when the ignition is The ParkSense® Warning screen will only be displayed if changed to the ON/RUN position. Sound and Display is selected from the Uconnect® ParkSense® can be active only when the shift lever is in System. Refer to ЉUconnect® Settings" in "UnderstandREVERSE. If ParkSense® is enabled at this shift lever ing Your Instrument Panel" for further information. position, the system will remain active until the vehicle The ParkSense® Warning screen is located within the speed is increased to approximately 7 mph (11 km/h) or Driver Information Display (DID). It provides visual above. The system will become active again if the vehicle warnings to indicate the distance between the rear speed is decreased to speeds less than approximately fascia/bumper and the detected obstacle. Refer to 6 mph (9 km/h). "Driver Information Display (DID)" in "Understanding ParkSense® Sensors The four ParkSense® sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors' field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle. Your Instrument Panel" for further information. ParkSense® Display When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. The system will indicate a detected obstacle by showing a single arc in one or more regions based on the obstacle's distance and location relative to the vehicle.