2013 Ford C-MAX Hybrid Owner Manual Printing 3 - Page 345

344 Wheels and Tires 4. Plug the power cable into the 12-volt power point in the vehicle. 5. Remove the warning sticker found on the canister and place it on the top of the instrument panel or the center of the dash. 6. Note: Start the engine only if the vehicle is outdoors or in a well-ventilated area. 7. Push and turn dial (A) counterclockwise to the sealant B position. Turn on the kit by pressing the on button (B). A 8. Inflate the tire to the pressure listed on the Tire Label located on the driver's door or the door jamb area. Note: When the sealing compound is first added into the tire, the air pressure gauge reading on the compressor unit may indicate a higher value; this is normal and should be no reason for concern. The pressure will drop after about 30 seconds of operation. The tire pressure has to be checked with the compressor in the OFF position to get the correct tire pressure reading. 2013 C-Max Full Hybrid (34h) Owners Guide gf, 3rd Printing, January 2013 USA (fus)