2010 Honda Insight Owner's Manual
2010 Honda Insight Manual
2010 Honda Insight manual content summary:
- 2010 Honda Insight | Owner's Manual - Page 1
Introduction Congratulations! Your selection of a 2010 Honda Insight was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new vehicle is to read this manual. In it, you will learn how to operate its driving controls and convenience - 2010 Honda Insight | Owner's Manual - Page 2
seat occupancy, airbag deployment data, and the failure of any airbag system component. This data belongs to the vehicle owner and may not be accessed by anyone else except as legally required or with the permission of the vehicle owner. Service diagnose and solve service problems. It may also - 2010 Honda Insight | Owner's Manual - Page 3
operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could Instructions how to use this vehicle correctly and safely. This entire book is filled with important safety information carefully. please read it iii 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 4
Relations (U.S. and Canada only) (warranty and contact information)...431 Authorized Manuals (U.S. only) (how to order) ...435 Index ...I Service Information Summary (fluid capacities and tire pressures) 1 00X31-TM8-6000 © 2009 American Honda Motor Co., Inc. - All Rights Reserved 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 5
, shift the transmission, and park. Maintenance The maintenance minder shows you when you need to take your vehicle to the dealer for maintenance service. There is also a list of things to check and instructions on how to check them. Taking Care of the Unexpected This section covers several problems - 2010 Honda Insight | Owner's Manual - Page 6
(P.130) POWER WINDOW SWITCHES (P.146) HOOD RELEASE HANDLE (P.287) PASSENGER'S FRONT AIRBAG (P.10) CLIMATE CONTROL SYSTEM (P.160) AUTOMATIC TRANSMISSION (CVT)(P.311) PADDLE SHIFTERS (P.316) ACCESSORY POWER SOCKET (P.153) USB ADAPTER CABLE (P.183, 191) : If equipped CONTINUED 3 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 7
WINDOW DEFOGGER/HEATED MIRROR (P.123/145) AUXILIARY INPUT JACK 2 (P.252) ACCESSORY POWER SOCKET (P.153) 2 1: 2: 3: To use the horn, press the center pad of the steering wheel. If equipped. Only on vehicles equipped with navigation system. Refer to the navigation system manual. 4 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 8
and Lock the Doors ...12 2. Adjust the Front Seats ...14 3. Adjust the Seat-Backs ...15 4. Adjust the Head Restraints ...16 5. Fasten and Position the Seat Belts ...17 6. Maintain a Proper Sitting Position ...18 Advice for Pregnant Women...19 Additional Safety Precautions ...20 5 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 9
in this manual. Don't Drink and Drive Alcohol and driving don't mix. Even one drink can reduce your ability to respond to changing conditions, and your reaction time gets worse with every additional drink. So don't drink and drive, and don't let your friends drink and drive, either. 6 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 10
in Safe Condition Having a tire blowout or a mechanical failure can be extremely hazardous. To reduce the possibility of such problems, check your tire pressures and condition frequently, and perform all regularly scheduled maintenance (see page 375 ). Driver and Passenger Safety 7 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 11
any action on your part. These include a strong Seats and Seat-Backs (4) Head Restraints (5) Collapsible Steering Column (6) Seat Belts (7) Front Airbags (8) Side Airbags (9) Side Curtain Airbags (10) Front Seat Belt Tensioners (11) Door Locks (12) Front Seat Belt Buckle Tensioners 8 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 12
a seat belt properly increases the chance of serious injury or death in a crash, even though your vehicle has airbags. In addition, most states and all Canadian provinces and territories require you to wear seat belts. Always wear your seat belt, and make sure you wear it properly. 9 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 13
system (SRS) with front airbags to help protect the heads and chests of the driver and a front seat the upper torso of the driver or a front seat passenger during a moderate to severe side impact (see passenger, and passengers in the outer rear seating positions during a moderate to severe side or - 2010 Honda Insight | Owner's Manual - Page 14
not replace seat belts. What you should do: Always wear your seat belt properly, and sit upright and as far back from the steering wheel as system can prevent all injuries or deaths that can occur in a severe crash, even when seat belts are properly worn and the airbags deploy. 11 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 15
Adults and Teens Introduction The following pages provide instructions on how to properly protect the driver, specific door or the hatch is not tightly closed. You will see the appropriate indicator(s) for each condition. You will also hear a beep when you turn the ignition switch to the ON (II) - 2010 Honda Insight | Owner's Manual - Page 16
outsider from unexpectedly opening a door or the hatch when you come to a stop. When the hatch is not tightly closed, this indicator will come on. When hatch are not tightly closed, the corresponding indicator for each condition will come on. The above example shows the front right and rear left - 2010 Honda Insight | Owner's Manual - Page 17
or dashboard. The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest. In addition to adjusting the seat, you can adjust the steering wheel up and down, and in and out (see - 2010 Honda Insight | Owner's Manual - Page 18
's seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel. Passengers with adjustable seatbacks should also adjust their seatback to a comfortable, upright position. Driver and Passenger Safety 15 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 19
and how the driver's and front passenger's active head restraints work. Adjust the driver's head restraint so the center of the back of your head rests against the center of the restraint. Have passengers adjust their head restraints properly as well. Taller persons should adjust their restraint as - 2010 Honda Insight | Owner's Manual - Page 20
remove any slack, then check that the belt rests across the center of your chest and over your shoulder. This spreads the forces of a crash over the strongest bones in your upper body. CONTINUED Driver and Passenger Safety Position the lap part of the belt as low as possible across your hips, then - 2010 Honda Insight | Owner's Manual - Page 21
is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off. Sitting improperly can increase 21 for additional information about your seat belts and how to take care of them. 18 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 22
upright, well back in the seat, with your feet on the floor. If you are pregnant, the best way to protect yourself and your unborn child when driving or riding in a vehicle is to always wear a seat belt, and keep the lap part of the belt as low as possible across the hips. 19 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 23
your dealer. Improperly replacing could be very seriously injured in a crash. hands or arms are close to an airbag cover, they could be injured if the airbag inflates. or covering front seat-back covers can prevent your side airbags from inflating during a side impact. 20 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 24
belts. This system monitors the front seat belts. If you turn the ignition switch to the ON (II) position before your seat belt is fastened, the beeper will sound and the indicator will flash. If your seat belt is not fastened before the beeper stops, the indicator will stop flashing but remain on - 2010 Honda Insight | Owner's Manual - Page 25
it keeps some tension on the belt. During a collision or sudden stop, the retractor automatically locks the belt to help restrain your body. The seat belts in all positions except the driver's have a lockable retractor that must be activated to secure a child seat (see page 49 ). 22 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 26
are equipped with automatic seat belt tensioners. When activated, the tensioners immediately tighten the belts to help hold the driver and a front passenger in position. The tensioners are designed to activate in any collision severe enough to cause the front airbags to deploy. 23 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 27
369 ). Any belt that is not in good condition or working properly will not provide good protection and should be replaced as soon as possible. Honda provides a limited warranty on seat belts. See your Honda Warranty Information booklet for details. If a seat belt is worn during a crash, it must be - 2010 Honda Insight | Owner's Manual - Page 28
Sensor (7) Front Passenger's Weight Sensors (8) Passenger Airbag Off Indicator (9) Occupant Position Detection System (OPDS) Sensors (10) Front Passenger's Weight Sensors/OPDS Sensors Control Unit (11) Supplemental Restraint System (SRS) Indicator (4) (7) (5) (4) CONTINUED 25 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 29
Airbags Your Airbag System includes: (15) (12) (16) Two SRS (supplemental restraint system) front airbags. The driver's airbag is stored in the center of the steering wheel; the front passenger Side Impact Sensors (Second) (15) Side Curtain Airbags (16) Rear Safing Sensor (14) 26 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 30
. An indicator on the instrument panel that alerts you to a possible problem with your airbags, sensors, or seat belt tensioners (see page 34 ). An indicator on the instrument panel in case your vehicle's electrical system is disconnected in a crash. Driver and Passenger Safety 27 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 31
Front Airbags Work During a frontal crash, your seat belt restrains your lower body and torso, and the front airbag helps protect airbag will deploy if there is no passenger in the front seat, or if the advanced airbag system has turned the passenger's airbag off (see page 35 ). 28 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 32
what looks like smoke. This is actually powder from the airbag's surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If to supplement the protection provided by the seat belt. Driver and Passenger Safety CONTINUED 29 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 33
system has weight sensors under the seat. Although Honda does not encourage carrying an infant or small child in front, if the sensors detect the weight of an infant or small child (up to about 65 lbs or 29 kg), the system will automatically turn the passenger's front airbag off. 30 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 34
front passenger's seat. Moving the front seat forcibly back against cargo on the seat or floor behind it. Hanging heavy items on the front passenger seat, or placing heavy items in the seat-back pocket. Moving the front seat or seat-back forcibly back against the folded rear seat. 31 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 35
side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats. Side Airbag Cutoff System Your vehicle has a side airbag cutoff system designed primarily to protect a child riding in the front passenger's seat. Although Honda does not encourage children - 2010 Honda Insight | Owner's Manual - Page 36
seats. Driver and Passenger Safety In a moderate to severe side impact, sensors will detect rapid acceleration and signal the control unit to instantly inflate the side curtain airbag and activate the seat belt tensioner on the driver's or the passenger's side of the vehicle. 33 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 37
as soon as possible if the SRS indicator alerts you to a possible problem. You will also see a ''CHECK AIRBAG SYSTEM'' message on the multi-information display. If you see any of these indications, the airbags and seat belt tensioners may not work properly when you need them. 34 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 38
seat. It does not mean there is a problem with the airbag. Be aware that objects placed on the front seat can cause the indicator to come on. If no weight is detected on the front seat, the airbag will be automatically shut off. However, the indicator will not come on. CONTINUED 35 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 39
Airbag Service Your airbag systems are virtually maintenance free, and there are no parts you can safely service. However, you must have your vehicle serviced if: An airbag ever inflates. Any airbag that has deployed must be replaced along with the control unit and other related parts. Any seat belt - 2010 Honda Insight | Owner's Manual - Page 40
to remove or modify a front seat to accommodate a person with disabilities, first contact Honda Automobile Customer Service at (800) 999-1009. another liquid soaks into a seatback, it can prevent the side airbag cutoff system from working properly. Driver and Passenger Safety 37 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 41
when they ride in a vehicle. Infants and small children must be restrained in an approved child seat that is properly secured to the vehicle (see pages 43 51 ). Children who are unrestrained or , then presents special information for infants, small children, and larger children. 38 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 42
and Transport Canada recommend that all children aged 12 and under be properly restrained in a back seat. Some states have laws restricting where children may ride. Children who ride in back are less likely to be injured by striking interior vehicle parts during a collision or hard braking. Also - 2010 Honda Insight | Owner's Manual - Page 43
you of the passenger's front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels. Canadian Models SUN VISORS 40 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 44
risk. General Guidelines If a child requires close physical attention or frequent visual contact, we strongly recommend that another adult ride with the child in the back seat. The back seat is far safer for a child than the front. Driver and Passenger Safety 41 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 45
your lap. If you are not wearing a seat belt in a crash, you could be thrown forward and crush the child against the dashboard or a seat-back. If you are wearing a seat belt, the child can be torn from your This can prevent children from accidentally falling out (see page 131 ). 42 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 46
be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker's weight or height limit for the seat, and the child is at least one year old. Only a rear-facing child seat provides proper support for a baby's head, neck, and back. CONTINUED 43 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 47
and follow the child seat instructions. Many experts recommend use of a rear-facing seat up to age two, if the child's height We strongly recommend placing a forward-facing child seat in a back seat, not the front. Placing a forward-facing child seat in the front seat of a vehicle equipped with - 2010 Honda Insight | Owner's Manual - Page 48
move the vehicle seat as far back as possible, and properly restrain the child. Before purchasing a conventional child seat, or using a previously purchased one, we recommend that you test the seat in the specific vehicle seating position or positions where the seat will be used. 45 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 49
is used in all examples, but the instructions are the same for a rearfacing child seat. secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH (Lower Anchors and Tethers for CHildren) system. A child whose seat is not properly secured to the vehicle can be endangered in - 2010 Honda Insight | Owner's Manual - Page 50
a secure connection between the child seat and the anchors. 3. Place the child seat on the vehicle seat, then attach the seat to the lower anchors according to the child seat maker's instructions. Some LATCH-compatible seats have a rigid-type connector as shown above. CONTINUED 47 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 51
. 4. Whatever type you have, follow the child seat maker's instructions for adjusting or tightening the fit. 5. Lift the head restraint (see page 139 ), then route the tether strap through the legs of the head restraint and over the seat-back, making sure the strap is not twisted. 48 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 52
child seat according to the seat maker's instructions, then insert the latch plate into the buckle and remove any slack from the lap portion of the belt. 2. To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into - 2010 Honda Insight | Owner's Manual - Page 53
seat with a tether can be installed in any seating position in the back seat, using one of the anchorage points shown above. Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available. 50 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 54
legs. 2. Attach the tether strap hook to the anchor, making sure the strap is not twisted. 3. Tighten the strap according to the seat maker's instructions. If the tether strap is too long and cannot be tightened firmly, find a route where the strap can be tightened securely. 51 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 55
properly and wear the seat belt properly. To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt, then ask yourself: 1. Does the child sit all the way back against the seat? 2. Do the child's knees bend comfortably over the edge of the seat? 52 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 56
states, provinces and A child may continue using a booster seat until the tops of their ears are even with the top of the vehicle's or booster's seat-back. A child of this height should be tall enough to use the lap/shoulder belt without a booster seat. Driver and Passenger Safety 53 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 57
A side airbag also poses risks. If any part of a larger child's body is in the path of a deploying side manual, and make sure you understand all seat belt instructions and all safety information. Move the vehicle seat to the rearmost position. Have the child sit up straight, back against the seat - 2010 Honda Insight | Owner's Manual - Page 58
a child put the shoulder part of a seat belt behind the back or under the arm. This could improve a child's comfort or reposition the shoulder part of a seat belt can make the belt should never use the same seat belt. If they do, they could be very seriously injured in a crash. 55 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 59
condition. If you must drive with the hatch open, open all the windows, and set the climate control system as shown below. If you must sit in your parked vehicle with the engine running, even in an unconfined area, adjust the heating and cooling system as follows: 1. Select the fresh air mode - 2010 Honda Insight | Owner's Manual - Page 60
. If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement. Canadian models DASHBOARD U.S. models only SUN VISORS U.S. models Driver and Passenger Safety RADIATOR CAP CONTINUED 57 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 61
Safety Labels DOORJAMBS U.S. models Canadian models 58 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 62
Windows ...146 Parking Brake ...148 Interior Convenience Items ...149 Cargo Area Cover ...150 Under Floor Storages ...152 Floor Storage Compartment ...152 Beverage Holders ...153 Accessory Power Sockets...153 Console Compartment ...154 Glove Box ...154 Center Tray ...155 Center Pockets...155 Coat - 2010 Honda Insight | Owner's Manual - Page 63
INDICATOR (P.35) CLIMATE CONTROL SYSTEM (P.160) POWER WINDOW SWITCHES (P.146) AUTOMATIC TRANSMISSION (CVT) (P.311) PARKING BRAKE LEVER (P.148) PADDLE SHIFTERS (P.316) USB ADAPTER CABLE (P.183,191) HOOD RELEASE HANDLE (P.287) Model with navigation system is shown. : If equipped 60 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 64
VOLT BATTERY CHARGING SYSTEM INDICATOR (P.63, 402) LOW OIL PRESSURE INDICATOR (P.62, 401) : If equipped SIDE AIRBAG OFF INDICATOR (P.65) AUTO IDLE STOP INDICATOR (P.66, 321, 322) LOW FUEL INDICATOR (P.70) SEAT BELT REMINDER LOW TIRE PRESSURE/ TPMS INDICATOR (P.66) INDICATOR (P.62) PARKING BRAKE - 2010 Honda Insight | Owner's Manual - Page 65
''FASTEN SEAT BELT'' or ''FASTEN PASSENGER SEAT BELT'' message on the multiinformation display. For more information, see page 21 . Malfunction Indicator Lamp You will also see a ''CHECK EMISSION SYSTEM'' message on the multiinformation display. For more information, see page 401 . 62 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 66
while the engine is running, or if it comes on while driving, it can indicate a problem in the brake system. You will also see a ''BRAKE FLUID LOW'' or ''CHECK BRAKE SYSTEM'' message on the multi-information display. For more information, see page 404 . Instruments and Controls 63 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 67
there is a problem with the Creep Aid System or Brake Assist (the normal brake operates properly). Have your vehicle checked by your dealer. For more information, see page 324 . You will also see a ''CHECK BRAKE SYSTEM'' message on the multiinformation display (see page 89 ). U.S. Canada Anti-lock - 2010 Honda Insight | Owner's Manual - Page 68
Canada Vehicle Stability Assist (VSA) System Indicator If equipped VSA Off Indicator , there is a problem with the VSA system. You will also see a ''CHECK VSA SYSTEM'' message on the turned off the vehicle stability assist (VSA) system. Instruments and Controls This indicator normally comes - 2010 Honda Insight | Owner's Manual - Page 69
. With the IMA indicator on, the vehicle may not accelerate as it normally does. Have the vehicle checked by the dealer as soon as possible. You will also see a ''CHECK IMA SYSTEM'' message on the multiinformation display. Auto Idle Stop Indicator See pages 321 and 322 . Low Tire Pressure/ TPMS - 2010 Honda Insight | Owner's Manual - Page 70
normal driving conditions, this indicator should not blink or stay on. In severe driving conditions, such as instructions and precautions on checking the engine's cooling system. Low Temperature Indicator This indicator shows the temperature of the engine coolant. If there is no problem 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 71
off after the engine starts. If it comes on at any other time, there is a problem in the electric power steering system. If this happens, stop the vehicle in a safe place and turn off the engine. Reset the system by restarting the engine. The indicator will stay on, but should go off after driving - 2010 Honda Insight | Owner's Manual - Page 72
burned out (see pages 363 and 365 ). Replace the bulb as soon as possible, since other position. If you turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position without turning off turn on the cruise control system by pressing the CRUISE button on the steering wheel (see page 256 ). - 2010 Honda Insight | Owner's Manual - Page 73
on the steering wheel (see page 76 ) to see the message (see page 89 ). Most of the time, this indicator comes on along with other indicators in the instrument panel such as the seat belt reminder indicator, SRS indicator, VSA system indicator, etc. Security System Indicator LOW FUEL INDICATOR - 2010 Honda Insight | Owner's Manual - Page 74
on. You will also see the symbol on the multi-information display with ECON ON or ECON OFF (see page 75 ). Instruments and Controls 71 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 75
mph (see page 73 ). The speedometer also has an ambient meter. The color of the ambient meter changes automatically according to your driving style (see page of the ambient meter (see page 103 ). SPEEDOMETER/AMBIENT METER CHARGE/ASSIST GAUGE TACHOMETER FUEL GAUGE KM/MILE CHANGE KNOB U.S. model - 2010 Honda Insight | Owner's Manual - Page 76
Fuel Gauge This shows how much fuel you have. It may show slightly more or less than the actual amount. The needle returns to the bottom after you turn off the ignition. Instruments and Controls SEL/RESET switches between miles per hour (mph) and kilometers per hour (km/h). 73 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 77
the multiinformation display (see page 84 ). If the IMA battery is too hot or too cold, the IMA system limits the IMA battery's output power to protect the battery. This disables the IMA assist and auto idle stop, even though the battery level indicator on the multiinformation display may show that - 2010 Honda Insight | Owner's Manual - Page 78
trouble-free driving. There are three types of messages: normal display messages, engine oil life and maintenance messages, and system position (see page 124 ). If you do not fasten your seat belt, you will see a ''FASTEN SEAT BELT'' message on the multiinformation display when you turn the ignition - 2010 Honda Insight | Owner's Manual - Page 79
) position, the multi-information display changes as shown on the next page each time you press the INFO ( / ) button or the SEL/ RESET button. 76 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 80
Multi-Information Display In the multi-information display, the system message is also displayed (see page 88 ) and segment displays the odometer/trip meter (A/B), outside temperature, and engine oil life and maintenance item code(s). MIDDLE SEGMENT UPPER SEGMENT Instruments and Controls U.S. - 2010 Honda Insight | Owner's Manual - Page 81
IMA System Power Flow Monitor/ IMA Battery Level Indicator (See page 84/85) Outside Temperature (See page 80) : Press the INFO button . : Press the INFO button . : Press the SEL/RESET button. U.S. model is shown. : This display will be shown when the Bluetooth HandsFreeLink is activated. 78 2010 - 2010 Honda Insight | Owner's Manual - Page 82
to change the number of miles or kilometers indicated. This meter shows the number of miles (U.S.) or kilometers (Canada) driven since you last reset it. There are two trip meters: Trip A and Trip B. Each trip meter and hold the SEL/RESET button until the number resets to ''0.0''. 79 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 83
U.S. models, and Celsius temperature in Canadian models. This shows the remaining engine oil life. It shows 100% after the engine oil is replaced and the display is reset. The engine oil life is calculated based on engine operating conditions. For more information, see page 337 . 80 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 84
Eco Guide Feedback Monitor ECO-DRIVE SCORE DISPLAY Average Fuel Economy Records U.S. CANADA LATEST ACCELERATION MONITOR U.S. model is shown. PAST AVERAGE FUEL ECONOMY Eco guide feedback monitor consists of three parts mpg (U.S. models) or l/100 km (Canadian models). CONTINUED 81 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 85
your vehicle's instant fuel economy in L/100 km. When you turn off the engine, the instant fuel economy (mpg or L/100 km) is also reset. : This shows your vehicle's average fuel economy in mpg (U.S. models) or liter/100 km (Canadian models) since you last reset trip computer B. 82 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 86
over the last several miles(U.S.) or kilometers (Canada), so it will vary with changes in speed If you want to reset the ELAPSED TIME manually, go to the trip computer's ELAPSED TIME . You can customize the ELAPSED TIME reset conditions on the multiinformation display (see page 100 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 87
) are represented by arrows on the display The battery level indicator shows the state of charge of the IMA battery. Only engine is powering vehicle. The system is consuming fuel. Engine is powering vehicle and IMA system is charging IMA battery. The system is consuming fuel. 84 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 88
battery level reading. The battery level reading may drop near the bottom under driving conditions that require IMA motor assistance for a long time, such as prolonged acceleration or climbing a long hill. The IMA motor will recharge the battery as you continue driving. CONTINUED 85 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 89
, cause the gauge to read higher than the actual battery level. The system will then perform a correction, and the battery level gauge reading will drop suddenly. When this happens, IMA assist and Auto Idle Stop are disabled until the IMA battery is sufficiently recharged by normal driving. This - 2010 Honda Insight | Owner's Manual - Page 90
.com website. In Canada, visit www.honda.ca, or call 1(888) 9-HONDA-9. Instruments and Controls On models with navigation system You can receive or make phone calls from your cell phone through your vehicle's Bluetooth HandsFreeLink (HFL) system without touching your cell phone. 87 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 91
before 5 seconds have elapsed, press the INFO ( / ) button on the steering wheel. Even if you press the INFO ( / ) button, some messages stay on or come on again at regular intervals until the problem is corrected. If the system message indicator remains lit on the instrument panel, you can see the - 2010 Honda Insight | Owner's Manual - Page 92
See page 148 See page 357 See page 402 See page 326 See page 401 See page 404 See page 65 CONTINUED Instruments and Controls Canada U.S. Canada 89 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 93
Multi-Information Display See page 332 U.S. only See page 68 See page 128 See page 128 See page 129 Canada only See page 338 See page 339 See page 340 See page 286 See page 80 See page 328 See page 329 See page 399 See page 311 See page 70 U.S. only See page 355 See page 120 90 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 94
ACCESSORY (I) or the LOCK (0) position, or move the shift lever out of Park, the display will change to the normal screen. If you try to enter the customizing mode while the vehicle is moving, you will see a ''MUST STOP AND SHIFT TO PARK must be stopped with the transmission in Park. CONTINUED If - 2010 Honda Insight | Owner's Manual - Page 95
Setting Option ENGLISH FRENCH SPANISH 5°F 0°F 5°F (U.S.) 3°C 0°C 3°C (Canada) ON OFF IGN OFF TRIP B TRIP A AUTO KM MILES ON OFF 60 sec 15 sec 30 sec Page 97 ADJUST doors. 99 100 101 103 105 METER COLOR CHANGE LIGHTING SETUP (P.104) : Default setting INTERIOR LIGHT DIMMING TIME 92 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 96
AUTO DOOR LOCK Description Changes when the doors automatically lock. Setting Option SHIFT FROM P WITH VEH SPD OFF SHIFT TO P DRIVER DOOR / IGN OFF ALL DOORS OFF DRIVER DOOR ALL DOORS ON OFF 90 sec 60 sec 30 sec SET CANCEL Page 107 AUTO system to set after you - 2010 Honda Insight | Owner's Manual - Page 97
your selection. If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page 115 . 94 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 98
Multi-Information Display NORMAL DISPLAY U.S. METER SETUP See page 96 Instruments and Controls CANADA LIGHTING SETUP See page 104 DOOR SETUP See page 106 : Press and hold the INFO ( / ) button. : Press the SEL/RESET button. : Press the INFO button : Press the INFO button . . 95 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 99
: LANGUAGE SELECTION ADJUST OUTSIDE TEMP. DISPLAY TRIP A RESET with REFUEL ELAPSED TIME RESET DISPLAY KM/MILES METER COLOR CHANGE While ''METER SETUP'' is shown, press the SEL/RESET button to enter the customize mode. Each button. : Press the INFO button . : Press the INFO button . 96 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 100
Spanish. To choose the language you want, follow these instructions: You can choose this item to customize from ''METER back to the customize item screen. If the ''SETTING INCOMPLETE'' message appears, go back to ''LANGUAGE SELECTION'' and repeat the procedure again. CONTINUED 97 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 101
degrees above or below the actual temperature, you can adjust it by following these instructions: You can choose this item back to the customize item screen. If the ''SETTING INCOMPLETE'' message appears, go back to ''ADJUST OUTSIDE TEMP. DISPLAY'' and repeat the procedure again. 98 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 102
reset every time you refuel your vehicle, follow these instructions: You can choose this item to customize from ''METER back to the customize item screen. If the ''SETTING INCOMPLETE'' message appears, go back to ''TRIP A RESET with REFUEL'' and repeat the procedure again. CONTINUED 99 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 103
button to see the selections. Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button. 100 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 104
completed, the display changes as shown above, and then goes back to the customize item screen. To change the displayed measurement in and trip information and to switch between kilometers and miles, follow these instructions: You can choose this item to customize from ''METER SETUP'' by - 2010 Honda Insight | Owner's Manual - Page 105
kilometers. Press the SEL/RESET button to see the selections. Select AUTO, KM, or MILES by pressing the INFO ( / ) back to the customize item screen. If the ''DISPLAY KM/MILES SETTING INCOMPLETE'' message appears, go back to ''DISPLAY KM/ MILES'' and repeat the procedure again. 102 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 106
/ RESET button. When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen. If the ''METER COLOR CHANGE SETTING INCOMPLETE'' message appears, go back to ''METER COLOR CHANGE'' and repeat the procedure again. 103 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 107
the SEL/RESET button to enter your selection. See page 105 : Press the SEL/RESET button. : Press the INFO button . : Press the INFO button . 104 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 108
lights stay on before they fade out, follow these instructions: You can choose this item to customize from ''LIGHTING back to the customize item screen. If the ''SETTING INCOMPLETE'' message appears, go back to ''INTERIOR LIGHT DIMMING TIME'' and repeat the procedure again. / 105 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 109
-Information Display Door Setup Here are the five custom settings for the door setup: AUTO DOOR LOCK AUTO DOOR UNLOCK DOOR LOCK MODE KEYLESS LOCK ACKNOWLEDGMENT SECURITY RELOCK TIMER While ''DOOR SETUP RESET button. : Press the INFO button : Press the INFO button . . See page 112 106 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 110
choose from: SHIFT FROM P The doors lock whenever you move the shift lever out of Park. WITH VEHICLE SPEED The doors lock when the vehicle speed reaches about 10 mph (about 16 km/h). OFF The auto door lock , then enter your selection by pressing the SEL/RESET button. CONTINUED 107 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 111
driver's door unlocks when you move the shift lever to Park. ALL DOORS WITH SHIFT TO P All the doors unlock when you move the shift lever to Park. When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen. 108 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 112
the doors unlock when you turn the ignition switch to the LOCK (0) position. OFF The auto door unlock is deactivated all the time. You can choose this item to customize from choose ''DRIVER DOOR with SHIFT to P,'' you will see the above display. Instruments and Controls CONTINUED 109 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 113
If the ''SETTING INCOMPLETE'' message appears, go back to ''AUTO DOOR UNLOCK'' and repeat the procedure again. To select whether the driver's door unlocks or all the doors unlock when you unlock the doors with the remote transmitter or the key, follow these instructions. You can choose this item to - 2010 Honda Insight | Owner's Manual - Page 114
Multi-Information Display If the ''SETTING INCOMPLETE'' message appears, go back to ''DOOR LOCK MODE'' and repeat the procedure again. Instruments and Controls selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen. 111 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 115
the LOCK button again within 5 seconds to verify that the doors and the trunk are locked and the security system has set (see page 255 ). You can customize the exterior lights not to flash and the beeper not / ) button, then enter your selection by pressing the SEL/ RESET button. 112 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 116
, the doors and the fuel fill door, automatically relock, and the security system sets. You can change this relock time from 30 seconds to 60 or 90 shown above, and then goes back to the customize item screen. If the ''SETTING INCOMPLETE'' message appears, go back to ''KEYLESS LOCK ACKNOWLEDGMENT'' - 2010 Honda Insight | Owner's Manual - Page 117
Multi-Information Display If the ''SETTING INCOMPLETE'' message appears, go back to ''SECURITY RELOCK TIMER'' and repeat the procedure again. Press the SEL/ selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen. 114 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 118
cancel DEFAULT ALL, select CANCEL, then press the SEL/RESET button. The screen goes back to the previous display. When DEFAULT ALL is set, you will see the above display , and then the screen goes back to the normal message mode. Repeat the same procedure to select DEFAULT ALL. 115 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 119
BLUETOOTH HANDS-FREE LINK SYSTEM VOICE CONTROL BUTTONS 2 (P.259) EX model with navigation system is shown. 1: 2: 3: To use the horn, press the center pad of the steering wheel. If equipped Only on vehicles equipped with navigation system. Refer to the navigation system manual. 116 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 120
you turn it to the shortest delay ( position), the wipers change to low speed operation when the vehicle speed exceeds 12 mph (20 km/h). 117 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 121
turn the wiper on. When you shift the transmission to the reverse position fluid reservoir as the windshield washer. 1. OFF When you turn the wiper switch to the ''OFF'' position, the wiper will return to its parked 2. OFF 3. Parking and interior lights 4. Headlights on 5. High Beams 6. - 2010 Honda Insight | Owner's Manual - Page 122
hear a click. The blue high beam indicator will come on (see page 69 ). Pull the lever back to return to the low beams. Instruments and Controls To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back. 119 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 123
parking brake. The headlights revert to normal operation when you turn them on with the switch. If you see a ''CHECK DRL SYSTEM'' message on the multiinformation display, there is a problem with the daytime running light system. Take your vehicle to a dealer to have it checked. 120 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 124
the knob to adjust the brightness with the ignition switch in the ON (II) position and the parking lights on. When you turn the knob, the multiinformation display changes to vertical bars that show The brightness level goes out about 5 seconds after you stop adjusting. CONTINUED 121 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 125
10 seconds. Hazard Warning Button HAZARD WARNING BUTTON Push the button next to the audio system to turn on the hazard warning lights (four-way flashers). This causes all four outside if you need to park in a dangerous area near heavy traffic, or if your vehicle is disabled. 122 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 126
Make sure all rear windows are clear and you have good visibility before starting to drive. The defogger and antenna wires on the inside of all rear windows can be accidentally damaged. When cleaning the glass, always wipe to turn the defogger on again when you restart the vehicle. 123 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 127
you improve your fuel economy by modifying some vehicle functions. When the ECON mode is on: Engine performance will be different The climate control system will have greater temperature fluctuations In addition, when the ECON mode is on, you may get more Ecological Drive Assist points (see page - 2010 Honda Insight | Owner's Manual - Page 128
stopped. To adjust Instruments and Controls To lock LEVER 1. Pull the lever under the steering column toward you until it stops. 2. Move the steering wheel so it points toward your chest, not toward your face. Make sure you can see the instrument panel gauges and indicators. 125 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 129
number if you ever have to get a lost key replaced. Use only Honda-approved key blanks. These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the . If they get wet, dry them immediately with a soft cloth. 126 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 130
. Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable. If you lose your key and you cannot start the engine, contact your dealer. As required by the FCC: This device complies with Part 15 of the FCC rules. Operation - 2010 Honda Insight | Owner's Manual - Page 131
automatic transmission, the shift lever must also be in Park. If the front wheels are turned, the wheel to the left or right as you turn the key. The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and START (III). ACCESSORY (I) You can operate the audio system and the accessory - 2010 Honda Insight | Owner's Manual - Page 132
ACCESSORY (I) position and open the driver's door. Remove the key to turn off the beeper. You will also see a ''REMOVE KEY'' message on the multi-information display. The shift lever must be in Park before you can remove the key from the ignition switch. Instruments and Controls 129 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 133
and unlocks that door. When the door is unlocked, you can see the red indicator on the lock tab above the inner door handle. 130 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 134
10 mph (U.S.)/15 km/h (Canada) or more, all the doors and the hatch lock automatically. When you shift to P after driving, the Controls Lock LEVER The childproof door locks are designed to prevent children seated in the rear from accidentally opening the rear doors. Each rear door 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 135
the hatch within 30 seconds, the doors automatically relock and the security system sets. UNLOCK BUTTON PANIC BUTTON The ceiling light and the door activated horn will sounds to verify that the doors are locked and the security system has set. You cannot lock the doors if any door or the hatch - 2010 Honda Insight | Owner's Manual - Page 136
replacement needs to be reprogrammed by your dealer. Replacing the Transmitter Battery If it takes several pushes on the button to lock or unlock the doors, replace the battery as soon as possible. Battery type: CR1616 To replace the battery: Instruments and Controls CONTINUED 133 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 137
fingernail. 3. Inside the transmitter, separate the inner cover from the keypad by carefully prying on the edge with a coin. 4. Remove the old battery and note the polarity. Make sure the polarity of the new battery is the same ( side facing down), then insert it in the keypad. 134 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 138
battery disposal. 5. Install the parts in reverse order. As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions complies with Industry Canada Standard RSS-210. Operation is subject to the following two conditions: (1) this - 2010 Honda Insight | Owner's Manual - Page 139
To open the hatch, pull and lift up the release. To close the hatch, use the handle to lower it, then press down on the back edge. Keep the hatch closed at all times while driving to avoid damaging the hatch and to prevent exhaust gas from getting into the interior - 2010 Honda Insight | Owner's Manual - Page 140
flat-tipped screwdriver to remove the cover on the back of the hatch. Push the release lever to the lower right as shown, and push the hatch to open it. If you need to unlock the hatch manually, it means there is a problem with the hatch. Have the vehicle checked by your dealer. 137 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 141
position, and release the bar. Try to move the seat to make sure it is locked in position. The height of your driver's seat is adjustable. To raise the seat, repeatedly pull up the lever on the outside of the seat cushion. To lower the seat, push the lever down repeatedly. 138 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 142
injuries. LEGS SEAT-BACK Instruments and Controls RELEASE BUTTON They are most effective when you adjust them so the center of the back of the occupant's head rests against the center of the restraint , push the release button sideways, and push the restraint down. CONTINUED 139 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 143
CUSHION Rear Center Position CUSHION Failure to reinstall the head restraints can result in severe injury during a crash. Always replace the head restraints before driving. LEGS SEAT-BACK RELEASE BUTTON RELEASE BUTTON LEGS SEAT-BACK When a passenger is seated in the rear seat, the head - 2010 Honda Insight | Owner's Manual - Page 144
For a head restraint system to work properly: Do not hang any items on the head restraints, or from the restraint legs. Do not place any object between an occupant and the seat-back. Install each restraint in its proper location. Only use genuine Honda replacement head restraints. Instruments and - 2010 Honda Insight | Owner's Manual - Page 145
down. LEVER 2. Unlock the seat-back by pulling up the release lever on the outer side of each rear seat-back. 3. Fold the seat-back forward. Make sure the seat-back and seat cushion are locked securely and all rear shoulder belts are positioned in front of the rear seat-backs. 142 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 146
Seats Make sure all items in the cargo area are secured. Loose items can fly forward and cause injury if you have to brake hard (See Carrying Cargo on page 295 ). Armrest Instruments and Controls EX models only The lid of the console compartment can be used as an armrest. 143 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 147
mirror right, left, up, or down. 4. When you finish, move the selector switch to the center (off) position. This turns the adjustment switch off to keep your settings. SELECTOR SWITCH ADJUSTMENT SWITCH . 2. Move the selector switch to L (driver's side) or R (passenger's side). 144 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 148
window defogger button. The indicator in the button comes on as a reminder. Press the button again to turn the heaters and the defogger off. 145 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 149
are away from the windows before closing them. DRIVER'S WINDOW SWITCH FRONT PASSENGER'S WINDOW SWITCH AUTO To open or close the driver's window, push or pull the window switch firmly down when you want the window to stop. Pull back on the switch and hold it to close the window. 146 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 150
stops sensing when the window is almost closed. You should always check that all passengers and objects are away from the window before closing it. NOTE: The driver's window auto reverse function is disabled when you continuously pull up the switch. Instruments and Controls 147 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 151
gear with the parking brake on. To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever. The parking brake indicator on the instrument panel should go out when the parking brake is fully released (see page 64 ). 148 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 152
CABLE VANITY MIRROR FRONT DOOR POCKET SUN VISOR ACCESSORY POWER SOCKET GLOVE BOX Instruments and Controls AUXILIARY INPUT JACK CENTER TRAY CARGO AREA SEAT-BACK POCKETS UNDER FLOOR STORAGES : If equipped EX model is shown. CENTER CONSOLE COMPARTMENT BEVERAGE HOLDERS CONTINUED 149 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 153
the cargo area cover to conceal your parcels and protect them from direct sunlight. To extend the cargo area cover, pull out the cover from the housing by pulling the handle on the cover's leading edge, then clip the mounting rods in the slots at both sides of the hatch opening. 150 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 154
HOUSING UNIT The cargo area cover housing unit can be removed to give you more cargo space. Release each cargo area cover under the cargo area floor. 1. Open the cargo floor lid. 2. Open the cargo area cover holder lids located on both sides of the cargo area floor. CONTINUED 151 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 155
in the illustration above. 4. Reinstall the cargo floor lid. To open the cargo floor, fold the cargo floor forward. To use the storage compartment located on the left side of the cargo area floor, hold the strap and raise the lid. Close the lid by pressing until it latches. 152 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 156
an accessory power socket in the front console panel. To use an accessory power socket, the ignition switch must be in the ACCESSORY (I) or ON (II) position. This socket is intended to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps). CONTINUED 153 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 157
Make sure to put the socket cover back in place to prevent any small foreign objects from getting into the socket. Console Compartment LEVER Glove Box On EX models only To open the console compartment, pull up on the lever and lift the armrest. To close, lower the armrest, and push it down until - 2010 Honda Insight | Owner's Manual - Page 158
console. You can also take the partition out to extend the tray. When you use the front beverage holders, you need to put the partition back to the original position on the center console. To open the center pocket, push on the knob. To close it, push the lid up until it latches. 155 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 159
clip and swing the sun visor toward the side window. Make sure you put the sun visor back in place when you are getting into or out of the vehicle. On U.S. EX models and Canadian models To use the vanity mirror on the back of the sun visor, pull up the cover. 156 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 160
Instruments and Controls Push Push EX model with navigation system The ceiling light has a three-position switch: ON, Door Activated, and OFF. In the Door Activated (center) position, the light comes on when you: turn it off. You can use the spotlights at all times. CONTINUED 157 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 161
Interior Lights Cargo Area Light SPOTLIGHTS Push Push U.S. EX model CARGO AREA LIGHT Your vehicle has a cargo area light on the left side panel of the cargo area. It comes on when you open the hatch. 158 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 162
navigation system) ...245 AM/FM Radio Reception ...246 Protecting Your Discs ...248 Remote Audio Controls...251 Auxiliary Input Jack ...252 Radio Theft Protection...253 Setting the Clock ...254 Security System ...255 Cruise Control ...256 Bluetooth HandsFreeLink ...259 Features 159 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 163
System AIR CONDITIONING BUTTON MODE CONTROL BUTTON FAN CONTROL BAR TEMPERATURE CONTROL DIAL FRESH AIR BUTTON RECIRCULATION BUTTON REAR WINDOW DEFOGGER/ HEATED MIRRORS BUTTON WINDSHIELD DEFROST BUTTON U.S. EX models and all Canadian models OFF BUTTON REAR WINDOW DEFOGGER BUTTON 160 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 164
can also be operated by voice control. See the navigation system manual for complete details. Using Automatic Climate Control The automatic climate control system in your vehicle picks the proper combination of air conditioning, heating, and ventilation to maintain the interior temperature you - 2010 Honda Insight | Owner's Manual - Page 165
it is in fully automatic mode. All other features remain automatically controlled. Making any manual selection causes the word AUTO in the display to go out. Fan Control Press the side of the bar to increase the fan speed and airflow. Press the side of the bar to decrease them. 162 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 166
. When the fresh air indicator is on, air is brought in from the outside of the vehicle. The system should be left in fresh air mode under almost all conditions. Keeping the system in recirculation mode, particularly with the A/C off, can cause the windows to fog up. CONTINUED 163 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 167
center and corner vents in the dashboard. This button directs the main airflow to the windshield for faster defrosting. It also overrides any mode selection you may have made. When you select , the system automatically switches to fresh air mode and turns on the A/C. For faster defrosting, manually - 2010 Honda Insight | Owner's Manual - Page 168
SENSOR To regulate the interior temperature and humidity, the climate control system has two sensors. A sunlight sensor is located in the top of the dashboard and a temperature/ humidity sensor is next to the steering column. Do not cover the sensors or spill any liquid on them. 165 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 169
Playing the FM/AM Radio (Models without navigation system) BUTTON PRESET BUTTONS VOL/SELECT KNOB FM/AM BUTTON BUTTON A.SEL BUTTON SCAN BUTTON SEEK BUTTON SEEK BUTTON BUTTON 166 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 170
ACCESSORY (I) or ON (II) position. Turn the system is not available. To Select buttons, and auto select. TUNE Use system will return to the normal display about 10 seconds after you stop system finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system - 2010 Honda Insight | Owner's Manual - Page 171
If you are traveling and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Press the A. SEL button. ''A. SEL'' flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM and - 2010 Honda Insight | Owner's Manual - Page 172
INFO OFF.'' PROGRAM SERVICE NAME DISPLAY ON The program service name display function shows system on, you will see the ''RDS INFO ON'' message on the display. If the station you are listening to is an RDS station, the displayed frequency switches to the station name. CONTINUED 169 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 173
FM/AM Radio (Models without navigation system) Radio Data System (RDS) Category RDS CATEGORY With Rhythm and blues, and soft rhythm and blues RELIGION: Programs concerned with religion. CLASSIC: Classical music JAZZ: Jazz INFO: News, information, sports, talk shows, is canceled. 170 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 174
, ''NOTHING'' will be blinking for about 5 seconds, then the system goes back to the last selected station. You can use the RDS program search or scan function even if the PS name display function is off. In this case, the display shows a frequency in place of a PS name. Features 171 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 175
the illumination of the audio system (see page 121 ). The audio system illuminates when the parking lights are on, even if the system is turned off. TREBLE FADER Adjusts the front-to-back strength of the sound. to MID as the default setting when the vehicle leaves the factory. 172 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 176
Playing a Disc (Models without navigation system) BUTTON CD BUTTON BUTTON DISC SLOT EJECT BUTTON Features RDM BUTTON TITLE BUTTON RPT BUTTON SCAN BUTTON SEEK BUTTON SEEK BUTTON BUTTON 173 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 177
format to listen by pressing the CD button. Video CDs and DVDs will not work in this unit. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. A disc compressed in AAC format cannot be played in this audio system. 174 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 178
Playing a Disc (Models without navigation system) The specifications for compatible MP3 files are: Sampling folder and file are shown. The system will continuously play a disc until you change modes. You cannot load and play 3-inch (8-cm) discs in this system. For information on how to handle and - 2010 Honda Insight | Owner's Manual - Page 179
Playing a Disc (Models without navigation system) Text Data Display Function Each time you press the TITLE button, the display shows you the text, if the disc was recorded hold the TITLE button until the next 16 characters are shown. You can see up to 31 characters of text data. 176 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 180
available, it is replaced with '' . '' (dot) in the display. When the disc has no text data, you will see ''NO INFO'' on the display. You will also see some text data under these conditions When you turn on the audio system next time, the system keeps your selection with the TITLE button 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 181
To activate folder random play, press the RDM button. You will see F-RDM in the display. The system will then select and play files randomly. This continues until you deactivate folder random play by pressing and holding play, to within a disc random play, then to normal play. 178 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 182
The system will then system samples the first file of all folders, F-SCAN is canceled, and the system Stop Playing a Disc Press the eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system you turn the system off while a you turn the system back on, the - 2010 Honda Insight | Owner's Manual - Page 183
page 249 . The audio system will try to play the disc. If there is still a problem, the error message will reappear File format not supported Solution Current track will be skipped. The next supported track or MANUAL PUSH EJECT Mechanical Error FOCUS Error CHECK DISC TOC Error 180 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 184
Playing an iPod (Models without navigation system) EX model iPod INDICATOR USB INDICATOR BUTTON AUX BUTTON Features BUTTON RDM BUTTON TITLE BUTTON RPT BUTTON SEEK (SKIP BUTTON ) SEEK (SKIP BUTTON BUTTON ) 181 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 185
console compartment by using your dock connector, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be recharged with the ignition switch in these positions. The system dock connector. We recommend backing up your data before playing - 2010 Honda Insight | Owner's Manual - Page 186
Features USB ADAPTER CABLE 1. Unclip the USB connector by pivoting it, and pull out the USB adapter cable in the console compartment. 2. Connect your dock connector to the iPod correctly and securely. 3. Install the dock connector to the USB adapter cable securely. CONTINUED 183 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 187
button while an iPod is playing to change files. SKIP Each time you press the (SKIP ) button, the system skips forward to the beginning of the next file. Press the (SKIP ) button, to skip backward to the beginning a file, press and hold either side ( or ) of the SKIP button. 184 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 188
iPod (Models without navigation system) The display shows items on the RDM button. If you select ''ALL,'' all available files on the selected list are played. Pressing the button goes back to the previous display and pressing the TITLE button cancels your selection. CONTINUED 185 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 189
system) SHUFFLE ALBUM This feature plays all available play, then to normal play. To Stop Playing Your iPod To play the radio when If you reconnect the same iPod, the system may begin playing where it left off, it. Make sure to follow the iPod's instructions on how to disconnect the dock connector - 2010 Honda Insight | Owner's Manual - Page 190
. Error Message USB ERROR BAD USB DEVICE PLEASE CHECK OWNERS MANUAL NO SONG UNSUPPORTED Cause USB ROM Error Solution There is problem with the USB adapter unit. Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected - 2010 Honda Insight | Owner's Manual - Page 191
Playing a USB Flash Memory Device (Models without navigation system) EX model USB INDICATOR BUTTON AUX BUTTON BUTTON VOL/SELECT BUTTON RDM BUTTON TITLE BUTTON RPT BUTTON SEEK (SKIP BUTTON ) SEEK (SKIP BUTTON BUTTON ) 188 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 192
it to the USB adapter cable in the console compartment, then press the AUX button. The audio system reads and plays the audio files on the the vehicle. Direct sunlight and high heat will damage it. We recommend backing up your data before playing a USB flash memory device. Depending on 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 193
Playing a USB Flash Memory Device (Models without navigation system) The specifications for compatible MP3 files are: Sampling frequency: 32 /22.05/24/32/ 44.1/48 kHz Bitrate: 8 320 kbps Supported standards: MPEG4/AAC LC MPEG2/AAC LC Partition: Top partition only Maximum layers: 8 190 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 194
the display. Features USB ADAPTER CABLE USB ADAPTER CABLE 1. Unclip the USB connector by pivoting it, and pull out the USB adapter cable in the console compartment. 2. Connect the USB flash memory device to the USB connector correctly and securely. CONTINUED 191 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 195
a USB flash memory device is playing to change files. SKIP Each time you press the (SKIP ) button, the system skips forward to the beginning of the next file. Press the (SKIP ) button, to skip backward to the beginning a file, press and hold either side ( or ) of the SKIP button. 192 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 196
Playing a USB Flash Memory Device (Models without navigation system) To Select a File from Folder and File Lists Pressing the button goes back to the previous display and pressing the TITLE button cancels this setting . Press the VOL/SELECT knob to set your selection. CONTINUED 193 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 197
Playing a USB Flash Memory Device (Models without navigation system) This feature REPEAT continuously plays a file. To activate the repeat feature, press the RPT button. You will see ''RPT'' button. You will see ''RDM'' in the display. To turn it off, press and hold the RDM button. 194 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 198
Playing a USB Flash Memory Device (Models without navigation system) FOLDER RANDOM This feature plays the files in the selected folder in random order. To activate the folder random the SCAN button, the mode changes from file scan to folder scan, then to normal play. Features 195 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 199
system) To Stop Playing selected on the audio system. Always follow the USB flash memory device's instructions when you remove it system will begin playing where it left off. USB Flash Memory Device Error Messages If you see an error message in the display, see page 197 . 196 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 200
MANUAL Cause USB ROM Error Solution There is problem with the USB adapter unit. Appears when the overcurrent protection feature of the system stops for the USB flash memory device. If it appears when the supported device is connected, reconnect the device. Abnormal power source Features - 2010 Honda Insight | Owner's Manual - Page 201
Playing the AM/FM Radio (Models with navigation system) POWER/VOLUME KNOB FM1 ICON AM ICON SOUND ICON BACK GROUND ICON FM2 ICON AUTO SELECT ICON AM/FM BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR PRESET BUTTONS 198 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 202
system in your vehicle can be operated using the voice control system. See the Navigation System Manual for complete details. To Play the AM/FM Radio Turn the system Stereo reproduction on AM is not available. To Select a Station You , the preset buttons, and auto select. TUNE Use the TUNE 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 203
. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system will then scan for the next strong station and play button's frequency is shown on the bottom of the audio display. 200 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 204
use the auto select feature to find stations in the local area. Press the AUDIO button to view the audio control icons, then touch the AUTO SEL icon. You will see AUTO SEL flashes in the display, and the system goes sound grid by touching the SOUND icon on the display. CONTINUED 201 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 205
you stop adjusting a mode. SPEAKER SETTING BASS/TREBLE SETTING BASS Adjusts the bass. TREBLE Adjusts the treble. To adjust the treble and bass, touch either or on the treble or bass adjustment bar. The adjustment bar on the lower right display shows you the current setting. 202 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 206
Models with navigation system) Screen Mode System Lighting You can use the instrument panel brightness control knob to adjust the illumination of the control panel (see page 121). The audio system illuminates when the parking lights are on, even if the radio is turned off. Features 203 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 207
Playing a Disc (Models with navigation system) CD ICON POWER/VOLUME KNOB JOYSTICK OPEN BUTTON CD/AUX BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR RANDOM BUTTON REPEAT BUTTON FAST FORWARD BUTTON SKIP SKIP BUTTON BUTTON REWIND BUTTON 204 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 208
disc before the system begins to play Video CDs and DVD discs will not work in this unit. A disc compressed in AAC format cannot be played in this audio system. Features Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. CONTINUED 205 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 209
Playing a Disc (Models with navigation system) The specifications for compatible MP3 files are: Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) protected by digital rights management (DRM), the audio unit displays FILE ERROR, and then skips to the next file. 206 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 210
system) To Load a Disc DISC SLOT CLOSE BUTTON Features OPEN BUTTON The in-dash disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, cup may spill on the screen when you go over a bump. CONTINUED 207 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 211
folder number and name, the file number and name, the artist name, and the elapsed time are shown. The system will continuously play a disc until you change modes. If the disc was not recorded with text data, it will preset button's function is shown on the bottom of the screen. 208 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 212
Playing a Disc (Models with navigation system) In MP3 or WMA mode FOLDER SELECTION To select the RPT button (preset 1) for 2 seconds. You will see FOLDER REPEAT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off. Selecting a different folder - 2010 Honda Insight | Owner's Manual - Page 213
folder random, press and hold the RDM button. You will see FOLDER RANDOM in the display. The system then selects and plays files randomly. This continues until you deactivate folder random by pressing the RDM button Pressing either SKIP button (preset 5 or 6) also turns off scan. 210 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 214
first file in each folder for 10 seconds each. After playing the first file of the last folder, the system goes to normal play. Pressing either SKIP button (preset 5 or 6), selecting a different folder with the TUNE List icon. The track list menu appears on the display. CONTINUED 211 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 215
or icon on the side of the screen. To go back to the previous display, touch the Return icon on the screen. Select the desired track/file by touching the icon on the display. The selected icon will be highlighted in blue. The system begins to play the selected track/file. With a disc - 2010 Honda Insight | Owner's Manual - Page 216
unit, fold back the screen by pressing the OPEN button (see page 207 ). Press the disc eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload on how to handle and protect discs, see page 248 . Features 213 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 217
or deformation. If there is no damage, insert the disc again. The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc Error CHECK DISC HEAT ERROR Disc Format Error High Temperature 214 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 218
a PC Card (Models with navigation system) POWER/VOLUME KNOB TRACK LIST ICON PC CARD ICON JOYSTICK Features PLAY MODE ICON OPEN BUTTON CD/AUX BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR REPEAT BUTTON REWIND BUTTON SKIP BUTTON SKIP BUTTON RANDOM BUTTON FAST FORWARD BUTTON 215 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 219
with navigation system) To Play a PC Card You operate the PC card player with the same controls used for the radio and the in-dash disc player. To load or play a card, the ignition switch must be in the ACCESSORY (I) or removed. Never insert foreign objects into the PC card slot. 216 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 220
Playing a PC Card (Models with navigation system) The specifications for compatible MP3 files are: Sampling frequency: DRM (digital rights management) files cannot be played. If the system finds a DRM file, it skips that file and plays the next available folder or file. Features 217 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 221
to show the audio display and operate the PC card player. You can also operate the audio system without using the control icons on the audio screen. Press any of the appropriate control buttons. the OPEN button beside the screen. The screen folds back, and the PC card slot appears. 218 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 222
with navigation system) There are three play modes: Folder, Artist, and Album. Touch the PLAY MODE icon, then choose one of the modes by touching its icon. When a mode is selected, it is highlighted in blue. Folder mode FOLDER MODE PLAY MODE ICON MODE INDICATOR Features CONTINUED 219 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 223
Playing a PC Card (Models with navigation system) PLAY MODE ICON To select a play mode, push the AUDIO button to show to the selectable playing menu. If you select ''Continue playing the current song,'' the system goes into the selected play mode after playing the current file. 220 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 224
a PC Card (Models with navigation system) If you select ''Play a new track list,'' the system goes into the selected play mode immediately and begins to play the new track list. To go back to the previous screen, press the the top of the joystick to select the icon. CONTINUED 221 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 225
1) for 2 seconds. You will see FOLDER REPEAT, ARTIST REPEAT or ALBUM REPEAT in the display. The system continuously replays the current folder/artist/album. Press and hold the RPT button again to turn it off. Pressing display. Press the RDM button again to return to normal play. 222 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 226
system or ALBUM RANDOM'' in the display. The system then selects and plays files randomly. This continues system plays the first file in the folder for about 10 seconds. If you do nothing, the system file of the last folder/artist/album, the system returns to normal play. Pressing either of the SKIP - 2010 Honda Insight | Owner's Manual - Page 227
(Models with navigation system) Using a Track List display, touch the or icon on the side of the screen. To go back to the previous display, touch the Return icon. To play a file, the parent folder. The current folder is highlighted in blue. In artist mode, the artist name is also displayed on the - 2010 Honda Insight | Owner's Manual - Page 228
Playing a PC Card (Models with navigation system) Song Search Function ALBUM NAME SONG SEARCH ICON TITLE BY KEYWORD ICON Features Folder mode is shown. RETURN ICON appears. You can then select any of three modes to search a file: Title by Keyword, Artist, and Album. CONTINUED 225 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 229
Playing a PC Card (Models with navigation system) Searching for a Song Title by Keyword To cancel button on the control panel, the display returns to the mode menu without doing a search. After the system searches for a song, a file list is displayed. To scroll through the list, touch the or icon - 2010 Honda Insight | Owner's Manual - Page 230
Card (Models with navigation system) Searching for a Song by Artist Name ARTIST LIST Searching for a Song by Album Name ALBUM LIST To Stop Playing a PC Card switch, the card will stay in the drive. When you turn the system back on, the card will begin playing where it left off. When you 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 231
Playing a PC Card (Models with navigation system) Removing a PC Card To remove a PC card from the audio unit, fold back the screen by pressing the OPEN button (see page ) 207 switch is off. PC Card Player Malfunction If there is a problem with the PC card player, see your dealer. 228 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 232
Playing an iPod (Models with navigation system) POWER/VOLUME KNOB iPod INDICATOR USB ICON JOYSTICK Features CD/AUX BUTTON AUDIO BUTTON SCAN BUTTON REPEAT BUTTON RANDOM BUTTON SKIP BUTTON SKIP BUTTON 229 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 233
console compartment by using your dock connector, then press the CD/AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be recharged with the ignition switch in these positions. The system dock connector. We recommend backing up your data before - 2010 Honda Insight | Owner's Manual - Page 234
system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions by pivoting it, and pull out the USB adapter cable in the console compartment. 2. Connect your dock connector to the iPod correctly and - 2010 Honda Insight | Owner's Manual - Page 235
iPod is playing to change files. SKIP Each time you press the SKIP button (Preset 6), the system skips forward to the beginning of the next file. Press the SKIP button (Preset 5), to skip '' on either the artists or albums list, all available files on the selected list are played. 232 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 236
(Models with navigation system) Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen , touch the or icon on the side of the screen. To go back to the previous display, touch the Return icon. To play a file, touch its - 2010 Honda Insight | Owner's Manual - Page 237
an iPod (Models with navigation system) To Select Repeat or it off, press the RPT button (Preset 1) again. TRACK RANDOM This feature plays all available files from the selected items in the iPod menu list (playlists, artists, albums or songs) , press the RDM button (Preset 2). 234 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 238
Available operating functions varies on models or versions. Some functions may not be available on the vehicle's audio system. To Stop touch the AUX icon to switch back to the iPod. Disconnecting an instructions on how to disconnect the dock connector from the USB adapter cable. 235 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 239
iPod Error Messages (Models with navigation system) If you see an error message on the screen while playing an iPod, find the solution in the chart to dealer. Error Message UNSUPPORTED NO SONG Solution Appears when an unsupported iPod is connected. There is no music information. 236 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 240
Playing a USB Flash Memory Device (Models with navigation system) POWER/VOLUME KNOB WMA/MP3 INDICATOR USB ICON JOYSTICK Features CD/AUX BUTTON AUDIO BUTTON SCAN BUTTON TUNE FOLDER BAR REPEAT BUTTON RANDOM BUTTON SKIP BUTTON SKIP BUTTON 237 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 241
it to the USB adapter cable in the console compartment, then press the CD/AUX button. The audio system reads and plays the audio files on the vehicle. Direct sunlight and high heat will damage it. We recommend backing up your data before playing a USB flash memory device. Depending on 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 242
navigation system) The 80/96/ 112/128/144/160/VBR kbps (MPEG2) Supported standards: MPEG1 Audio Layer3 MPEG2 Audio LSF Layer3 Partition: Top 48 320/VBR kbps (Max 384) Supported standards: WMA version 7/8/9 Partition: Top : 8 320 kbps Supported standards: MPEG4/AAC LC MPEG2/AAC LC Partition - 2010 Honda Insight | Owner's Manual - Page 243
the USB connector correctly and securely. When the USB flash memory device is connected and the USB mode is selected on the audio system, the WMA or MP3 indicator is shown on the navigation screen. It also shows the folder and file numbers, and the elapsed time on the screen. 240 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 244
to change files. SKIP Each time you press the SKIP button (Preset 6), the system skips forward to the beginning of the next file. Press the SKIP button (Preset , touch the or icon on the side of the screen. To go back to the previous display, touch the Return icon. To play a file, touch - 2010 Honda Insight | Owner's Manual - Page 245
Playing a USB Flash Memory Device (Models with navigation system) To Select Repeat, Random or Scan Mode: You can select any type of repeat, random and scan modes by using 1). You will see ''FOLDER REPEAT'' in the display. To turn it off, press and hold the RPT button (Preset 1). 242 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 246
Playing a USB Flash Memory Device (Models with navigation system) TRACK RANDOM This feature plays all the files in random order. To activate the track in the folder. Press the SCAN button to get out of the scan mode. The system plays the last file sampled. Features CONTINUED 243 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 247
the AUX icon to switch back to the USB flash memory device. Disconnecting a USB Flash Memory Device You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Always follow the USB flash memory device's instructions when you remove it. When - 2010 Honda Insight | Owner's Manual - Page 248
Flash Memory Device Error Messages (Models with navigation system) If you see an error message on the message, take your vehicle to your dealer. Error Message UNPLAYABLE FILE UNSUPPORTED NO SONG Solution The system cannot read the file(s). Check the files in the USB flash memory device. There is - 2010 Honda Insight | Owner's Manual - Page 249
can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kHz FM as the distance from the station's transmitter, nearby large objects, and atmospheric conditions. A radio station's signal gets weaker as you get farther away from its to. 246 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 250
vehicles and stationary sources can cause temporary reception problems. As required by the FCC: Changes or modifications of poor radio reception in city driving. Radio reception can be affected by atmospheric conditions such as thunderstorms, high humidity, and even sunspots. You may be able to - 2010 Honda Insight | Owner's Manual - Page 251
to be used by the system. Play only standard round discs. Odd-shaped discs may jam in the drive or cause other problems. Handle your discs properly to a disc, use a clean soft cloth. Wipe across the disc from the center to the outside edge. A new disc may be rough on the inner and 248 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 252
Features Bubbled/ Wrinkled With Label/ Sticker Using Printer Label Kit Sealed With Plastic Ring 2. Damaged discs 3. Poor quality discs Chipped/ Cracked Warped Burrs CONTINUED 249 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 253
) CD Triangle Shape Fingerprints, scratches, etc. Audio unit may not play the following formats. CD-R or CD-RW may not play due to the recording conditions. Scratches and fingerprints on the discs may cause the sound to skip. Can Shape Arrow Shape 250 - 2010 Honda Insight | Owner's Manual - Page 254
to go back to the previous station. If you press and hold the CH button ( ) or ( ), the system goes into system Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel. CONTINUED 251 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 255
input jack on the front panel. The system will accept auxiliary input from standard audio accessories. When a compatible audio unit is connected to the jack, press the CD/ AUX (on vehicles with navigation system) or AUX (on vehicles without navigation system) button to select it. 252 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 256
system's serial number in this owner's manual. If you lose the card, you must obtain the code number from a dealer. To do this, you will need the system's serial number. If your vehicle's battery attempts, you must then leave the system on for 1 hour before trying again. Features 253 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 257
3 (R) button to set the clock back to the previous hour. If the system The navigation system receives signals from the global positioning system (GPS), and the displayed time is updated automatically by the GPS. Refer to the navigation system manual for how to adjust the time. 254 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 258
display (see page 12 ) to see if the doors and hatch are fully closed. Since it is not part of the monitor display, manually check the hood. SECURITY SYSTEM INDICATOR Features Once the security system is set, opening any door, the hatch, or the hood without using the key or the remote transmitter - 2010 Honda Insight | Owner's Manual - Page 259
a crash. Use the cruise control only when traveling on open highways in good weather. SET/DECEL BUTTON 1. Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on. 2. Accelerate to the desired cruising speed above 25 mph (40 km/h). 256 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 260
turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed. Resting your foot on the brake pedal causes cruise control to cancel. Features 257 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 261
cruising speed as before. Pressing the CRUISE button turns the system off and erases the previous cruising speed. You can cancel cruise control in any of these ways: Tap the brake pedal. Push the CANCEL button on the steering wheel. Push the CRUISE button on the steering wheel. 258 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 262
HandsFreeLink On models with navigation system Bluetooth HandsFreeLink (HFL) allows you to place and honda. com or call (888) 528-7876. In Canada, visit www.honda.ca, or call (888) 9-HONDA-9. Using HFL HFL Buttons HFL TALK BUTTON Features NAVI VOICE CONTROL BUTTONS HFL BACK BUTTON HFL Talk - 2010 Honda Insight | Owner's Manual - Page 263
Bluetooth HandsFreeLink Voice Control Tips Press and release the HFL Talk button each time you want to make a command. To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls. MICROPHONE Air or wind noise from the dashboard and side vents and - 2010 Honda Insight | Owner's Manual - Page 264
display: SIGNAL STRENGTH BATTERY LEVEL STATUS Some phones may send battery, signal strength, and roaming status information to HFL. Features HFL MODE ROAM STATUS PHONE DIALING The Bluetooth icon will also appear on the audio display when a phone is linked. CONTINUED 261 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 265
Bluetooth HandsFreeLink HFL MESSAGE A notification that there is an incoming call, or HFL is in use, will appear on the navigation screen when the audio system is on. When there is an incoming call, or HFL is in use, ''HFL'' will appear at the bottom of the map screen. 262 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 266
Bluetooth HandsFreeLink How to Use HFL The ignition switch must be in the ACCESSORY (I) or ON (II) position. ''Pair'' ''Edit'' ''Phone Setup'' ''Delete'' ''List'' Press HFL Talk button ''Status'' ''Next Phone'' ''Set Pairing Code'' Pair a phone to the system (See page 266) Edit the name of a - 2010 Honda Insight | Owner's Manual - Page 267
Bluetooth HandsFreeLink ''Redial'' ''Transfer'' ''Mute'' ''Send'' Press HFL Talk button Redial the last number phonebook entry (See page 273) Delete a phonebook entry (See page 274) If your phone supports this function, use this to transfer contacts from your phone to HFL (See page 274) Hear - 2010 Honda Insight | Owner's Manual - Page 268
(See page 282) Hear a tutorial for general rules on using the system (See page 261) Hear a list of available commands and additional information describing each command (See page 261) Press and release the HFL Talk button each time you give a command. : Canadian models CONTINUED 265 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 269
your Bluetooth-compatible cell phone to the system. Phone Setup This command group is available for manual. Up to six phones can be paired. Your phone's battery may drain faster when it is paired to HFL. If after three minutes your phone is not ready to pair or a phone is not found, the system - 2010 Honda Insight | Owner's Manual - Page 270
Bluetooth HandsFreeLink To rename a paired phone: To delete a paired phone: To hear the names of all paired phones: Press and release the HFL Talk button before a command. 1. Say ''Phone setup.'' 2. Say ''Edit '' after the prompts. 3. If there is more than one phone paired to the system 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 271
Bluetooth HandsFreeLink To hear which paired phone is currently linked: To change from the currently linked phone to another paired phone: To change the pairing code setting: Press and release the HFL Talk is linked to the system. Press and release the HFL Talk button before a command. 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 272
between your phone and vehicle is 30 feet (10 meters). During a call, HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle's battery. To make a call using a phone number: To make a call using a name in the HFL phonebook - 2010 Honda Insight | Owner's Manual - Page 273
Bluetooth HandsFreeLink To redial the last number called by HFL: To make a call from an imported phonebook: Press and release the HFL Talk button and say ''Redial.'' 1. Press the INFO button, then select ''Cellular enter the PIN to access it. See page 277 for more information. 270 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 274
Bluetooth HandsFreeLink Receiving a Call When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on. Press the HFL Talk button to answer the call, or the HFL Back press the HFL Talk button again. If press the HFL Back button. To search - 2010 Honda Insight | Owner's Manual - Page 275
and release the HFL Talk button before a command. 1. Say ''Send.'' 2. Follow the HFL prompts and say the name or number you want to send. 3. Follow the HFL prompts to send the tones and continue the call. NOTE: To send a pound ( ), say ''pound.'' To send a star (*), say ''star.'' 272 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 276
Bluetooth To edit the number stored in a name: Press and release the HFL Talk button before a command. 1. Say ''Phonebook .'' 2. Say ''Edit '' 5. Follow the HFL prompts to complete the edit. Press and release the HFL Talk button before a command. 1. Say ''Phonebook .'' 2. Say ''Store'' after the - 2010 Honda Insight | Owner's Manual - Page 277
Bluetooth HandsFreeLink To delete a name: To list all names in the phonebook: To store a specific phone number from your cell phone directly to the HFL phonebook (available on some phones): Press and release the HFL Talk Follow the HFL prompts if you want to store another number. 274 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 278
with this feature: In the U.S., visit handsfreelink.honda. com or call (888) 528-7876. In Canada, visit www.honda.ca, or call (888) 9-HONDA-9. The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system. Once a phonebook has been imported, you can - 2010 Honda Insight | Owner's Manual - Page 279
Bluetooth HandsFreeLink Select a person from the list. Up to three category icons are displayed in the left side of the list: Preference Home Mobile List ICON Work Other Fax Car Voice If the phonebook is PIN- the person's number you want to call, and press the HFL Talk button. 276 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 280
Bluetooth HandsFreeLink Delete Imported Phonebook: You can delete any imported phonebook. Select ''Delete Imported Phonebook ,'' and a list of imported phonebooks will see the above display. Enter the new 4-digit PIN. You will have to re-enter the PIN for confirmation. CONTINUED 277 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 281
Bluetooth HandsFreeLink To change the PIN to a new number: To remove a PIN: Select ''PIN number,'' then select ''Do not use PIN'' after you enter the The display will change as shown above. Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification. 278 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 282
Bluetooth HandsFreeLink System Setup This command group allows you to change or customize HFL basic settings. To set a 4-digit passcode to lock the HFL system for security purposes: Press and release the HFL Talk button before a command. 1. Say ''System setup.'' 2. Say ''Security''after the prompts - 2010 Honda Insight | Owner's Manual - Page 283
(I) position. Press and release the HFL Talk button before a command. 1. Say ''System setup.'' 2. Say ''Auto transfer'' after the prompts. 3. HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting. 280 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 284
the passcode, say ''System clear.'' Paired phones, all names in the HFL phonebook and all imported phonebook data will be lost. Press and release the HFL Talk button before a command. 1. Say the language you want to change to in that language. 2. Follow the HFL prompts. Features 281 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 285
owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions - 2010 Honda Insight | Owner's Manual - Page 286
Recommendation ...284 Service Station Procedures ...285 Refueling...285 Tighten Fuel Cap Message ...286 Opening and Closing the Hood ...287 Oil Check ...288 Engine Coolant Check ...289 Fuel Economy ...290 Accessories and Modifications ...293 Carrying Cargo ...295 Before Driving 283 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 287
quality gasolines containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend, in areas where it is available, the use of gasoline that does NOT contain manganese - 2010 Honda Insight | Owner's Manual - Page 288
Stop Park with the driver's side closest to the service problem with your vehicle's fuel vapor recovery system. The system helps keep fuel vapor from going into the atmosphere. Try filling at another pump. If this does not fix the problem, consult your dealer. TETHER CONTINUED 285 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 289
The message should go off after several days of normal driving once you tighten or replace the fuel fill cap. To scroll to another message, press the INFO button. The ''TIGHTEN FUEL CAP'' message will appear each time you restart the engine until the system turns the message off. 286 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 290
or replaced. If the MIL does not go off, have your vehicle inspected by a dealer. For more information, see page 403 . Opening and Closing the Hood HOOD RELEASE HANDLE LATCH Before Driving Pull 1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the - 2010 Honda Insight | Owner's Manual - Page 291
Service Station Procedures To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched. Oil Check DIPSTICK GRIP SUPPORT - 2010 Honda Insight | Owner's Manual - Page 292
Service Station Procedures Engine Coolant Check RESERVE TANK MAX Refer to Owner's Maintenance Checks on page 345 for information about checking other items on lines. If it is below the MIN line, see Adding Engine Coolant on page 353 for information on adding the proper coolant. 289 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 293
Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition miles per gallon City MPG Highway MPG Combined Fuel Economy the U.S. or 20,000 km in Canada per year multiplied by the cost per - 2010 Honda Insight | Owner's Manual - Page 294
Rapid acceleration, abrupt cornering, and hard braking increase fuel consumption. Observe the speed limit Aerodynamic drag has a big effect on fuel economy at speeds above 45 mph (75 km/h). Reduce your speed and you reduce the drag. Trailers, car top carriers, roof racks and bike racks are - 2010 Honda Insight | Owner's Manual - Page 295
of the air conditioning system The A/C puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible Direct calculation is the recommended source of information about your actual fuel economy. Using frequency of fill-ups or taking above. 292 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 296
. Follow all instructions in this owner's manual regarding accessories and modifications. When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle's computer controlled systems, such as your airbags, anti-lock brakes, and - 2010 Honda Insight | Owner's Manual - Page 297
tires can interfere with the operation of your vehicle's anti-lock brakes and other systems. Modifying your steering wheel or any other part of your vehicle's safety features can make the systems ineffective. If you plan to modify your vehicle, consult your dealer. : U.S. models 294 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 298
pages. GLOVE BOX CONSOLE COMPARTMENT 1 : EX models only 2 : LX models only EX model is shown. 1 FLOOR STORAGE COMPARTMENT DOOR POCKETS COIN POCKET 2 CENTER TRAY Before Driving CARGO AREA UNDER FLOOR STORAGES SEAT-BACK POCKETS 1 1 : EX models only 2 : LX models only 295 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 299
available cargo and luggage load capacity of your vehicle. Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed. Follow all load limits and other loading guidelines in this manual. Steps for Determining Correct Load Limit (1)Locate - 2010 Honda Insight | Owner's Manual - Page 300
the vehicle, all occupants, accessories, cargo, and trailer tongue load Cargo Weight (550 lbs) Example 2 Max Load (850 lbs) Passenger Weight (150 lbs x 4 = 600 lbs) Cargo Weight (250 lbs) Example 3 Max Load (850 lbs) Passenger Weight (150 lbs x 5 = 750 lbs) Cargo Weight (100 lbs) 297 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 301
rope or cord so they will not shift while you are driving. Do not place items on the cargo area cover (if equipped), or stack objects higher than the top of the back seat. They could block your view and be thrown about the vehicle during a crash or sudden stop. If you carry large items that prevent - 2010 Honda Insight | Owner's Manual - Page 302
Driving AIR INTAKE The air intake for the IMA battery and electronics is located on the rear left pillar. Do not block this air intake, it may cause the IMA battery and the power control unit to overheat, causing the IMA to shut down. It will start working again after it cools. 299 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 303
300 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 304
the Paddle Shifters ...316 Auto Idle Stop ...321 Parking ...323 Braking System...324 Anti-lock Brakes (ABS) ...326 Tire Pressure Monitoring System (TPMS) ...328 Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System ...332 Towing a Trailer ...334 Driving 301 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 305
and locked. 9. Fasten your seat belt. Check that your passengers have fastened their seat belts (see page 17 ). 10.When you start the engine, check the gauges and indicators in the instrument panel, and the messages on the multi-information display (see pages 61 , 72 and 75 ). 302 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 306
Starting the Engine 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Make sure the shift lever is in Park. Press on the brake pedal. 4. Without touching the accelerator pedal, turn the ignition key to the START (III) position. - 2010 Honda Insight | Owner's Manual - Page 307
page 290 .) Your vehicle's fuel economy may improve more with the ECON mode on (see page 124 ). The driver feedback information is shown in two locations: The ambient meter, located behind the speedometer (see page 72 ). The multi-information display (see page 75 ). 304 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 308
Ecological Drive Assist System (Eco Assist TM) Eco Guide Feedback Center Position Acceleration Deceleration Monitor Monitor ECO DRIVE BAR Efficient Zones Inefficient Braking Zone Inefficient Driving Zone ECO ELEMENTS During acceleration, the bar extends to the right of the center line. During - 2010 Honda Insight | Owner's Manual - Page 309
METER (Background Color) Meter Background Color Green Fuel Economy High Blue Green U.S. model is shown. The Ambient Meter (the light behind the speedometer) changes color to show the effects of your driving style. This feature can be turned off (see page 103 ). Blue Low 306 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 310
(Eco Assist TM) Eco Assist Scoring A point system is used so you can monitor your driving style and display in the following ways: Real Time Score Your current trip is represented on the Eco Guide screen, starting without any leaves on the plants. Leaves then accumulate during the current trip, - 2010 Honda Insight | Owner's Manual - Page 311
Ecological Drive Assist System (Eco Assist TM) Drive Cycle Score The score from your just completed trip is represented on the Eco Score screen by the -UP RECOGNITION ICON TROPHY DRIVE CYCLE SCORE LIFETIME POINTS STAGE-DOWN RECOGNITION ICON When turning off the ignition switch 308 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 312
Assist System (Eco the maximum third stage score. The scoring system for points is based on: Braking and accelerating Vehicle speed ECON button usage Idle duration turned off. Once the 3rd stage maximum score is reached, the system continues to monitor your driving. If you maintain a fuel efficient - 2010 Honda Insight | Owner's Manual - Page 313
are some of the conditions that may effect your score: Extremely high or low ambient temperature Inconsistent acceleration use, such as pumping the pedal repeatedly within a short period of time Frequent use of the climate control system Short distance trips Reset the System The following procedure - 2010 Honda Insight | Owner's Manual - Page 314
transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible. When the ''D'' indicator warns of a possible problem with the transmission, you will see a ''CHECK TRANSMISSION'' message on the multi-information display. 311 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 315
the lever. Move the lever. To shift from Park to any position, press firmly on the brake pedal, press the release button on the front of the shift lever, then pull the lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or the ACCESSORY (I) position. 312 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 316
that allow the engine to run at higher speeds when it is cold. LX models Second (S) Selecting Second shifts the transmission into a lower range of ratios for better acceleration and increased engine braking. Use Second when you are going down a steep hill. Driving CONTINUED 313 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 317
S. The S position is similar to D, except the range of ratios are different for better acceleration and increased engine braking. With the shift lever in D or S, you can also use the paddle shifters to shift the transmission up or down. With the paddle shifters, you can operate the transmission much - 2010 Honda Insight | Owner's Manual - Page 318
the cover. Make sure the notch on the cover is on the left side. Insert the key back into the ignition switch, press the brake pedal, and restart the engine. If you need to use the shift lock release, it means your vehicle is developing a problem. Have it checked by your dealer. 315 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 319
transmission (CVT) to the D-paddle shift mode. You can shift the transmission up or down through seven-stages manually with the paddle shifters. SHIFT INDICATOR Downshifting gives you more power when climbing, and provides engine braking when going down a steep hill. To shift up or down, use the - 2010 Honda Insight | Owner's Manual - Page 320
the engine braking when going down steep or long hills, and provides more power when climbing uphills. You can upshift the transmission manually to reduce the rpm. The transmission control system monitors the accelerator pedal use and your driving conditions. When you press the accelerator pedal as - 2010 Honda Insight | Owner's Manual - Page 321
shift stop and the vehicle speed is about 6 mph (10 km/h). If there is a problem in the transmission while you are driving with the paddle shifters, the D indicator flashes, the D-paddle shift mode is canceled, and the transmission returns to ordinary automatic transmission (CVT). 318 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 322
, pull the (left) paddle shifter. Downshifting with the (left) paddle shifter allows you to increase the engine braking when going down steep or long hills, and provides more power when climbing uphills. You can upshift the transmission manually to reduce the rpm. CONTINUED 319 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 323
64 km/h) 45 mph (72 km/h) 50 mph (81 km/h) 55 mph (89 km/h) L (Low) mode To shift to Low, press and hold both paddle shifters simultaneously until you see L in the shift indicator. Use Low to get more power when climbing, and for maximum engine braking when going down steep hills. 320 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 324
setting of the climate control system The climate control system is in use to dehumidify the moist air inside the vehicle The vehicle is stopped by braking suddenly When the ECON button is on, the engine is more likely to stop. See page 124 for the ECON button. Driving 321 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 325
even if the brake pedal is pressed: The shift position is changed to R or L The accelerator pedal is pressed The pressure to the brake pedal is reduced and the vehicle starts moving while stopped on an incline The IMA battery charge becomes low The climate control system starts to dehumidify - 2010 Honda Insight | Owner's Manual - Page 326
packages, valuables, etc. in the cargo area or take them with you. Lock the doors. Driving If the vehicle is facing downhill, turn the front wheels toward the curb. Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage - 2010 Honda Insight | Owner's Manual - Page 327
brakes by taking your foot off the accelerator and downshifting to a lower speed. Check the brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Be extra cautious in your driving. 324 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 328
: Creep Aid System When you release the brake pedal while the Auto Idle Stop function is activated, this feature keeps the braking pressure until the engine starts, and prevents the vehicle from dropping back. Brake-Assist Brake Pad Wear Indicators If the brake pads need replacing, you will - 2010 Honda Insight | Owner's Manual - Page 329
Anti-lock Brakes (ABS) The anti-lock brake system (ABS) helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it. The electronic brake distribution (EBD) system, which is part of the ABS, also balances the - 2010 Honda Insight | Owner's Manual - Page 330
, and the parking brake is fully released, the EBD system may also be shut down. Test your brakes as instructed on page 404 . If the brakes feel normal, drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock - 2010 Honda Insight | Owner's Manual - Page 331
can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Because tire pressure varies by temperature and other conditions, the low tire pressure/TPMS indicator may come on unexpectedly. 328 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 332
TPMS System Failure If there is a problem with the TPMS, you will see the above message on the multi-information display. If you see this message, the system is off and is not monitoring the tire pressures. Have the system checked by your dealer as soon as possible. CONTINUED 329 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 333
equipped with the tire pressure monitor sensor. Each wheel is equipped with a tire pressure sensor mounted inside the tire behind the valve stem. You must use TPMS specific wheels. It is recommended that you always have your tires serviced by your dealer or a qualified technician. 330 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 334
tire. If used, you will have to replace the tire pressure sensor. Have the flat tire repaired by your dealer as soon as possible. As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful - 2010 Honda Insight | Owner's Manual - Page 335
if the VSA system is turned off with the VSA OFF switch. In this case, you cannot turn the VSA system off by pressing the VSA OFF switch again. Without VSA, your vehicle will have normal braking and cornering ability, but it will not have VSA traction and stability enhancement. 332 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 336
VSA on again. We do not recommend driving your vehicle with the VSA and traction control systems switched off. VSA and Tire Sizes Driving with varying tire or wheel sizes may cause the VSA to malfunction. When replacing tires, make sure they are of the same size and type as your original tires - 2010 Honda Insight | Owner's Manual - Page 337
Towing a Trailer Your vehicle is not designed to tow a trailer. Attempting to do so can void your warranties. 334 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 338
Variable Transmission (CVT) ...356 Brake Fluid ...357 Lights ...359 Roof Antenna ...369 Cleaning the Seat Belts ...369 Floor Mats ...369 Dust and Pollen Filter ...370 Wiper Blades ...370 Tires ...375 Checking the 12 Volt Battery ...381 Vehicle Storage ...383 Maintenance 335 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 339
working with the battery or compressed air. Burns from hot parts. Let the engine and exhaust system cool down before touching any parts. Injury from moving parts. Do not run the engine unless instructed to do so. Improperly maintaining this vehicle, or failing to correct a problem before driving - 2010 Honda Insight | Owner's Manual - Page 340
engine oil replacement and indicated maintenance service. Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage. Engine Oil Life Display ENGINE OIL LIFE DISPLAY The remaining engine oil life is shown - 2010 Honda Insight | Owner's Manual - Page 341
with the message, the system message indicator comes on ( wheel repeatedly to select the engine oil life information. Along with the ''OIL LIFE'' message, you will see the percentage of the remaining engine oil life and the maintenance item codes on the multi-information display. 338 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 342
system message indicator comes on (see page 70 ). Maintenance When the remaining oil life is 5 to 1 percent, the multi-information display shows a ''SERVICE DUE NOW'' message with the same maintenance items ''SERVICE steering wheel repeatedly to select the engine oil life. The message ''SERVICE,'' - 2010 Honda Insight | Owner's Manual - Page 343
(see page 70 ). Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life. The message ''SERVICE,'' along with ''0%,'' and the maintenance item code are displayed on the multi-information display when the calculated engine oil life is 0 1 percent. 340 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 344
maintenance item code(s). When you press the SEL/RESET button to select the engine oil life, the message ''SERVICE,'' along with the maintenance item code(s) and the total negative distance traveled after the oil life became 0%, will be displayed on the multi-information display. 341 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 345
2. If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly. 3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multiinformation display. 342 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 346
but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed. 4. Select ''RESET'' by pressing - 2010 Honda Insight | Owner's Manual - Page 347
Log. Check your warranty booklet for more information. We recommend using Honda parts and fluids whenever you have maintenance done. These are manufactured to the same high quality standards as the original components, so you can be confident of their performance and durability. 344 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 348
: Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ''certified'' to EPA standards. According to state and federal regulations, Honda will not deny a claim for emissions warranty coverage - 2010 Honda Insight | Owner's Manual - Page 349
emissions warranty on page 345 . NOTE: Independent of the maintenance messages on the multi-information display, replace the brake fluid every 3 years. Inspect idle speed every 160,000 miles (256,000 km). Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy. 346 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 350
Fluid Locations BRAKE FLUID (Black cap) ENGINE OIL FILL CAP ENGINE OIL DIPSTICK (Orange loop) AUTOMATIC TRANSMISSION (CVT) FLUID DIPSTICK (Yellow loop) Maintenance WASHER FLUID (Blue cap) RADIATOR CAP ENGINE COOLANT RESERVOIR 347 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 351
oil is energy conserving, and that it meets the American Petroleum Institute's latest requirements. Unscrew and remove the engine oil fill cap on the valve cover. Pour the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the - 2010 Honda Insight | Owner's Manual - Page 352
weight. You must follow the oil and filter change intervals shown on the multiinformation display. and durability. API CERTIFICATION SEAL Honda Motor Oil is the preferred 0W- is highly recommended that you use Honda Motor Oil in your vehicle for your Insight. This special oil is formulated to help - 2010 Honda Insight | Owner's Manual - Page 353
Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service stationtype hydraulic lift for this service. Unless you have the , and clips with a flat-tipped screwdriver, then pull the under-cover down. 350 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 354
. Make sure the oil filter gasket is not stuck to the contacting surface of the engine. If it is, remove it before installing a new oil filter. 8. Refill the engine with the recommended oil. Engine oil change capacity (including filter): 3.4 US qt (3.2 ) Maintenance CONTINUED 351 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 355
several minutes, then check the drain bolt and oil filter for leaks. 11.Turn off the engine, let it -cover back in place and reinstall the holding clips and screws. Lock the clips securely by pushing on the center center. Do not discard it in a trash bin or dump it on the ground. 352 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 356
antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or - 2010 Honda Insight | Owner's Manual - Page 357
. 6. Pour coolant into the reserve tank. Fill it to halfway between the MAX and MIN marks. Put the cap back on the reserve tank. Do not add any rust inhibitors or other additives to your vehicle's cooling system. They may not be compatible with the coolant or engine components. 354 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 358
. Antif reeze can damage your vehicle's paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid. Maintenance On U.S. models Check the fluid level by removing the cap and looking at the level gauge. 355 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 359
any spill immediately; it could damage components in the engine compartment. Always use Honda CVTF (Continuously Variable Transmission Fluid). DIPSTICK Check the fluid level with the engine at normal operating temperature. 1. Park the vehicle on level ground. Start the engine, let it run until the - 2010 Honda Insight | Owner's Manual - Page 360
If it is not available, you should use only DOT 3 or DOT 4 fluid, from a sealed container, as a temporary replacement. Using any non-Honda brake fluid can cause corrosion and decrease the life of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon - 2010 Honda Insight | Owner's Manual - Page 361
Brake Fluid MAX MIN The fluid level should be between the MIN and MAX marks on the side of the reservoir. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspected for leaks or worn brake pads. 358 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 362
then remove the upper part by pulling it straight up. 2. Remove the electrical connector from the cover by pushing on the tab to unlock it, then slide the connector off the cover. 3. Remove the cover on the back of the headlight assembly by turning it counterclockwise. CONTINUED 359 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 363
cover. 5. Remove the bulb from the headlight assembly by turning it one-quarter turn counterclockwise. 9. Turn on the headlights to test the new bulb. CONNECTOR BULB COVER 4. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 360 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 364
part of the windshield washer reservoir tank in the reverse order of removal. Low Beam Headlight BULB 4. Install the new bulb, and turn it one-quarter turn clockwise to lock it in place. 5. Push the electrical connector back by turning it one-quarter turn counterclockwise. 361 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 365
Replacing a Front Parking Light Bulb HOLDING CLIP BULB 4. Install the socket back into the headlight assembly. Turn it clockwise to lock it in place. 5. Turn on the lights to make sure the new bulb is working. (Right side) 6. Install the upper part then remove the upper part by pulling it straight - 2010 Honda Insight | Owner's Manual - Page 366
on its left edge with a flat-tipped screwdriver. 2. Remove the bolt and pull the front turn light assembly from the bumper while taking the tab out from the holder. 3. Remove the socket from the front turn signal light assembly by turning it one-quarter turn counterclockwise. 363 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 367
4. Install the socket back into the headlight assembly. Turn it clockwise to lock it in place. 5. Turn on the lights to make sure the new bulb is working. SOCKET 1. Open the hood. 2. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 364 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 368
Lights Replacing the Rear Bulbs HOOKS CLIP TRIM HOOKS CLIP Maintenance 1. Open the hatch. 2. Push on the area of the trim as shown in the illustration above to assembly. Unclip the top half of the trim from the body by pulling it out. Then unclip the bottom half. CONTINUED 365 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 369
three bulbs is burned out: back-up light, turn signal, or side marker. 8. Pull the whole light assembly outwards from the body carefully. 9. Remove the socket by turning it one-quarter turn counterclockwise. 10.Remove the burned out bulb by pulling it straight out of its socket. 366 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 370
reinstall the trim, set the bottom edge of the trim in the original position and push the bottom half of the trim to clip it back securely. Then push the upper half of the trim to secure the top clip. 16.Secure the hooks by pushing on the - 2010 Honda Insight | Owner's Manual - Page 371
has side turn signal lights. The lights should be replaced by your dealer. Rear License Plate Light Bulbs The license plate has two lights above it. The bulbs should be replaced by your dealer. High-mount Brake Light The high-mount brake light should be replaced by your dealer. 368 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 372
the Seat Belts LOOP Floor Mats To unlock Driver's floor mat is shown. Maintenance Before using an automatic car wash, remove the radio antenna so it does not get damaged. Remove the antenna by unscrewing it. When you reinstall the antenna, tighten it securely. Before entering or parking in areas - 2010 Honda Insight | Owner's Manual - Page 373
from the climate control system becomes less than usual. Wiper Blades Check the condition of the wiper blades at least every 6 months. Replace them if you find signs of cracking in the rubber, and areas that are getting hard or if they leave streaks and unwiped areas when used. 370 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 374
Wiper Blades WIPER ARM WIPER ARMS LOCK TAB To replace a wiper blade: 1. Raise each wiper arm off the windshield, . Pivot the blade assembly toward the wiper arm until it releases from the wiper arm. When replacing a wiper blade, make sure not to drop the wiper blade or wiper arm down on the - 2010 Honda Insight | Owner's Manual - Page 375
Blades 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the two rubber tabs inside the blade fit to each notch of the reinforcement, as shown. 372 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 376
and that its edge is not bunched up. 8. Lower the wiper arm down against the windshield, the passenger's side first, then the driver's side. To replace a rear wiper blade: 1. Raise the wiper arm off the rear window. 2. Disconnect the blade assembly from the wiper arm by pivoting the blade assembly - 2010 Honda Insight | Owner's Manual - Page 377
from the holder. Slide the blade out of the holder. 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. 374 - 2010 Honda Insight | Owner's Manual - Page 378
inflated can cause a crash in which you can be seriously hurt or killed. Follow all instructions in this owner's manual regarding tire inflation and maintenance. Maintenance The tire pressure monitoring system (TPMS) warns you when a tire pressure is low. See page 328 for more information. On - 2010 Honda Insight | Owner's Manual - Page 379
wear. You should look for: Bumps or bulges in the tread or side of the tire. Replace the tire if you find either of these conditions. Cuts, splits, or cracks in the side of the tire. Replace the tire if you can see fabric or cord. Excessive tread wear. The compact spare tire - 2010 Honda Insight | Owner's Manual - Page 380
left on the tire. A tire this worn gives very little traction on wet roads. You should replace the tire if you can see three or more tread wear indicators. Maintenance Improper wheel weights can damage your vehicle's aluminum wheels. Use only Honda wheel weights f or balancing. 377 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 381
directional tires, rotate only front-to-back. When the tires are rotated, make sure the air pressures are checked. Also be sure you use only TPMS specific wheels. If you do not, the tire pressure monitoring system will not work. Replacement wheels are available at your dealer. 378 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 382
under certain conditions. Snow Tires Tire Chains Installing improper tires on your vehicle can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed. Always use the size and type of tires recommended in this owner's manual. Wheel and Tire Specifications - 2010 Honda Insight | Owner's Manual - Page 383
instructions in this owner's manual regarding the selection and use of tire chains. Traction devices that are the wrong size or improperly installed can damage your vehicle's brake lines, suspension, body, and wheels. Stop driving if they are hitting any part of the vehicle. Aluminum alloy wheels - 2010 Honda Insight | Owner's Manual - Page 384
the condition of the 12 volt battery monthly by looking at the test indicator window. The label on the battery explains the test indicator's colors. If additional battery maintenance is needed, see your dealer or a qualified technician. WARNING: Battery posts, terminals, and related accessories - 2010 Honda Insight | Owner's Manual - Page 385
vehicle's battery is disconnected or goes dead, the audio system may system The navigation system will also disable itself. The next time you turn on the ignition switch, the system will require you to enter a PIN before it can be used. Refer to the navigation system manual. 382 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 386
vehicle back on the road. If possible, store your vehicle indoors. Fill the fuel tank. Wash and dry the exterior completely. Clean the interior. Make sure the carpeting, floor mats, etc., are completely dry. Leave the parking brake off. Put the transmission in Park. Block the rear wheels. Cover the - 2010 Honda Insight | Owner's Manual - Page 387
384 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 388
...398 Low Oil Pressure Indicator ...401 12 Volt Battery Charging System Indicator ...402 Malfunction Indicator Lamp ...403 Brake System Indicator ...404 Fuses ...405 Fuse Locations ...410 Emergency Towing ...412 If Your Vehicle Gets Stuck ...413 Taking Care of the Unexpected 385 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 389
; the system cannot monitor the spare tire pressure. Manually check the spare tire pressure to be sure it is correct. TREAD WEAR INDICATOR BAR Replace the tire when you can see the tread wear indicator bars. The replacement should be the same size and design tire, mounted on the same wheel. The - 2010 Honda Insight | Owner's Manual - Page 390
. Put the transmission in Park. Apply the parking brake. 2. Turn on the hazard warning lights, and turn the ignition switch to the LOCK (0) position. Have all passengers get out of the vehicle while you change the tire. 3. Open the hatch. 4. Remove the cargo area floor by carefully pulling the - 2010 Honda Insight | Owner's Manual - Page 391
of the cargo area. 7. Unscrew the wing bolt and take the spare tire out of its well. 8. Remove the jack compartment cover by pulling the knob. 9. Turn the jack's end bracket counterclockwise to loosen it, then remove the jack. 10.Loosen each wheel nut 1/2 turn with the wheel nut wrench. 388 2010 - 2010 Honda Insight | Owner's Manual - Page 392
POINTS EXTENSION WHEEL NUT WHEEL COVER WHEEL NUT WRENCH On LX models 12.Remove the wheel cover by carefully prying under its edge with the flat tip of the tire is off the ground. 14.Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from - 2010 Honda Insight | Owner's Manual - Page 393
hub with a clean cloth. Wipe the hub carefully; it may be hot from driving. 18.Tighten the wheel nuts securely in the same crisscross pattern. Have the wheel nut torque checked at the nearest automotive service facility. Tighten the wheel nuts to: 80 lbf·ft (108 N·m , 11 kgf·m) 390 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 394
19.Remove the center cap (if equipped) before storing the flat tire in the cargo area well. 20.Place back on the bolt. 24.Secure the flat tire by screwing the wing bolt back into its hole. Store the box in the wheel of the flat tire. Taking Care of the Unexpected CONTINUED 391 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 395
not get scratched or damaged. FLOOR 27.Place the cargo area floor in its original position. Close the hatch. U.S. models only 28.Your vehicle's original tire has a tire pressure monitoring system sensor. To replace a tire, refer to Changing a Tire with TPMS (see page 330 ). 392 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 396
hooked into the clips around the edge of the wheel cover. 2. Align the valve mark on the wheel cover to the tire valve on the wheel, then install the wheel cover. 3. Make sure the wire support ring is on the outer side of the tire valve as shown. Taking Care of the Unexpected 393 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 397
while the IMA battery charge is normally sufficient, check the following: Check the transmission interlock. The transmission must be in Park or neutral or the starter will not operate. Are you using a properly coded key? An improperly coded key will cause the immobilizer system indicator in the - 2010 Honda Insight | Owner's Manual - Page 398
terminal connections (see page 381 ). You can then try jump starting the vehicle from a booster 12 volt battery (see page 396 ). If you find nothing wrong, you will need a qualified technician to find the problem. See Emergency Towing on page 412 . Taking Care of the Unexpected 395 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 399
battery can cause it to rupture. 2. Turn off all the electrical accessories: climate control, audio system, lights, etc. Put the transmission in Park, and set the parking brake. BOOSTER BATTERY The numbers in the illustration show you the order to connect the jumper cables. 396 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 400
end to the grounding strap as shown. Do not connect this jumper cable to any other part of the engine. 5. If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast , you may cause an electrical short. Taking Care of the Unexpected 397 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 401
less than the actual level temporarily. It will show the correct level after you drive for at least 30 minutes. If the Engine Overheats The high temperature indicator should be off under most conditions. If the engine indicator on can cause serious damage to your engine. 398 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 402
seriously scald you. Do not open the hood if steam is coming out. 1. Safely pull to the side of the road. Put the transmission in Park, and set the parking brake. Turn off all the accessories, and turn on the hazard warning lights. CONTINUED 399 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 403
available, you can add plain water. Remember to have the cooling system drained and refilled with the proper mixture as soon as you can. 10.Put the radiator cap back counterclockwise, without pushing down, to the first stop. After the pressure releases, push down on the cap, and turn it until it - 2010 Honda Insight | Owner's Manual - Page 404
level back to problem stopped, the oil pressure is dropped, and the low oil pressure indicator does not come on. Running the engine with low oil pressure can cause serious mechanical damage almost immediately. Turn of f the engine as soon as you can saf ely get the vehicle stopped. 401 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 405
Motor Assist (IMA) battery charge drops below a desired level and the engine starts to recharge the battery. This indicator may blink after you start the vehicle in the morning when the temperature is below 20 °F ( 30°C). It will stop blinking when the IMA battery warms up. 402 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 406
. Those repairs may not be covered by your vehicle's warranties. This indicator may also come on with the ''D'' indicator. Readiness Code Your vehicle has certain ''readiness codes'' that are part of the on-board diagnostics for the emissions systems. In some states, part of the emissions testing is - 2010 Honda Insight | Owner's Manual - Page 407
you stop at a service station (see page 357 ). If the fluid level is low, take your vehicle to a dealer, and have the brake system inspected for leaks or worn brake pads. However, if the brake pedal does not feel normal, you should take immediate action. A problem in one part of the system's dual - 2010 Honda Insight | Owner's Manual - Page 408
behind the dashboard on the driver's side. The interior fuse box label is attached on the back side of the cover. To see the interior fuse box label, remove the cover by pulling it toward you while holding the bottom center part of cover. Taking Care of the Unexpected CONTINUED 405 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 409
Fuses UNDER-HOOD (On the battery) TAB TAB Next to the battery The under-hood fuse is on the positive terminal of the battery. To open it, push the tabs as shown. The under-hood fuse box is located next to the battery. To open it, push the tab as shown. 406 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 410
and all other accessories are off. FUSE PULLER BLOWN 2. Remove the cover from the underhood fuse box located on the battery (see page 406 ). 3. Check each of the large fuses in the under-hood fuse box on the 12 volt battery by looking through the top at the wire inside. Replacement of these fuses - 2010 Honda Insight | Owner's Manual - Page 411
the vehicle without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits. Make sure you can do without that circuit temporarily (such as the accessory power socket or radio). If you replace the blown fuse with a spare - 2010 Honda Insight | Owner's Manual - Page 412
the audio system section in this owner's manual. The navigation system will also disable itself. The next time you turn on the ignition switch, the system will require you to enter a PIN before it can be used. Refer to the navigation system manual. Taking Care of the Unexpected 409 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 413
Back Up TPMS 1 Driver's Power Window Not Used Back Up Light SRS Transmission SOL OPDS Not Used A/C ABS/VSA 2 IMA ACC Socket Accessory A 15 A 15 A 30 A 15 A 15 A Circuits Protected Hazard Stop/Horn Not Used LAF Door Lock Main Headlight Main Small Light Radiator Fan motor EX models 410 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 414
100 A 60 A 20 A Circuits Protected Battery, Main, ACG EPS Horn, Stop, Hazard No. Amps. 1 2 15 A 15 A Circuits Protected Ignition Coil (EX) Ignition Coil (IN) Taking Care of the Unexpected 1 : U.S. LX model 2 : U.S. models except LX model and all Canadian models 3 : EX models 411 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 415
to D position and hold for 5 seconds, then to N. Turn off the engine. Release the parking brake. Leave the ignition switch in the ACCESSORY (I) position so the steering wheel does not lock. Improper towing preparation will damage the transmission. Follow the above procedure exactly. If you cannot - 2010 Honda Insight | Owner's Manual - Page 416
towing. To use the towing hook: 1. Remove the cover from the front bumper using your fingers, or pry it off using a cloth and a flat-tipped screwdriver. 2. Remove the towing hook and wheel nut wrench from the tool case in the cargo area. CONTINUED Taking Care of the Unexpected 413 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 417
tighten it with the wheel nut wrench. To avoid damage to your vehicle, use the towing hook f or straight, f lat ground towing only. Do not tow at an angle. The tow hook should not be used to tow the vehicle onto a f lat bed. Do not use it as a tie down. 414 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 418
Emissions Controls ...426 PGM-FI System ...426 Ignition Timing Control System...426 Exhaust Gas Recirculation (EGR) System ...426 Three Way Catalytic Converter ...426 Replacement Parts...426 Three Way Catalytic Converter ...427 Emissions Testing ...428 Technical Information 415 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 419
uses to register your vehicle for warranty purposes. It is also necessary for located on the engine bulkhead. Remove the cover on the engine compartment bulkhead to view the VIN. Always close the cover when finished. VEHICLE IDENTIFICATION NUMBER (VIN) COVER CERTIFICATION LABEL 416 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 420
Identification Numbers The engine number is stamped into the engine block. The transmission number is on a label on top of the transmission. The IMA Motor Number is stamped on the motor housing. ENGINE NUMBER IMA MOTOR NUMBER TRANSMISSION NUMBER Technical Information 417 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 421
Capacities Fuel tank Change Total Change 2 Including filter Without filter Total Change Automatic transmission Total fluid (CVTF) U.S. Vehicles Windshield Canada 's doorjamb. Seating Capacities Total Front capacity: 0.116 US gal (0.44 ) 2 : Excluding the oil remaining in the engine 418 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 422
Low Front turn signal lights Front parking lights Front side marker lights Side turn signal lights (door mirror) 1 Rear turn signal lights Stop/taillights Back-up lights Rear side marker lights License plate lights Spot lights 1 Ceiling light Cargo area light High-mount brake light Glove box light - 2010 Honda Insight | Owner's Manual - Page 423
All passenger car tires must actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. 420 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 424
under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive (2) Tire Identification Number (TIN) (3) Maximum Tire Pressure (4) Maximum Tire Load CONTINUED 421 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 425
tires are replaced, they should be replaced with located on the sidewall of the tire. DOT EUYU 2KNR 2202 Maximum Tire Load Max Load R 15 DOT This indicates that the tire meets all requirements of the U.S. Department of Transportation. Manufacturer's identification mark. EUYU 422 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 426
safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale Each tire, including Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them - 2010 Honda Insight | Owner's Manual - Page 427
on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined - 2010 Honda Insight | Owner's Manual - Page 428
the environment. Under certain conditions of sunlight and climate Air Act The United States Clean Air Act Canada, Honda vehicles comply with the Canadian emission requirements, as specified in an agreement with Environment Canada, at the time they are manufactured. Crankcase Emissions Control System - 2010 Honda Insight | Owner's Manual - Page 429
should use only new Honda replacement parts or their equivalent for repairs. Using lower quality parts may increase the emissions from your vehicle. The emissions control systems are covered by warranties separate from the rest of your vehicle. Read your warranty manual for more information. The - 2010 Honda Insight | Owner's Manual - Page 430
NOx. A replacement unit must be an original Honda part or its equivalent . The three way catalytic converter must operate at a high temperature for the chemical reactions to take place. It can set on fire any combustible materials that come near it. Park to air pollution - 2010 Honda Insight | Owner's Manual - Page 431
, and let it idle for 20 seconds. 5. Keep the vehicle in Park. Increase the engine speed to 2,000 rpm, and hold it there until the temperature gauge rises to at least 1/4 of the scale (about 3 minutes). 6. Without touching the accelerator pedal, let the engine idle for 20 seconds. 428 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 432
vehicle coast for several seconds without using the accelerator pedal or the brake pedal. 9. Make sure the vehicle has been parked with the engine off for 30 minutes. If the testing facility determines the readiness codes are still not set, see your dealer. Technical Information 429 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 433
430 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 434
Warranty and Customer Relations Customer Service Information...432 Warranty Coverages ...433 Reporting Safety Defects (U.S. Vehicles) ...434 Authorized Manuals ...435 Warranty and Customer Relations 431 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 435
's management, contact Honda Customer Service. U.S. Owners: American Honda Motor Co., Inc. Honda Automobile Customer Service Mail Stop 500-2N-7A 1919 Torrance Boulevard Torrance, California 90501-2746 Tel: (800) 999-1009 Canadian Owners: Customer Relations Honda Canada Inc. Visit www.honda.ca for - 2010 Honda Insight | Owner's Manual - Page 436
2010 warranty manual that came with your vehicle. warranties cover your vehicle's emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information. Original Equipment Battery Limited Warranty this warranty gives up Honda accessories - 2010 Honda Insight | Owner's Manual - Page 437
it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or American Honda Motor Co., Inc. To contact NHTSA, you may call the Vehicle Safety Hotline toll motor vehicle safety from http://www.saf ercar.gov. 434 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 438
Series Honda Insight Body Repair Manual 2010 Honda Insight Owner's Manual 2010 Honda Insight Navigation System Owner's Manual 2010 Honda Insight Honda Service History 2010 Honda Insight Technology Reference Guide Order Form for Previous YearsIndicate Year and Model Desired Service Manual: Covers - 2010 Honda Insight | Owner's Manual - Page 439
436 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 440
Driving ...283 Belts, Seat ...9, 21 Beverage Holder ...149 Bluetooth HandsFreeLink ...259 Brakes Anti-lock System (ABS) ...326 Break-in, New Linings ...284 Bulb Replacement ...365 Fluid ...357 Pad Wear Indicator...325 Parking ...148 System Indicator ...63, 64, 404 CONTINUED INDEX I 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 441
...325 Disc Player ...173, 204 Disposal of Used Oil ...352 C Card, PC ...215 Cargo Area Cover ...150 Cargo Area Light ...158 Capacities Chart...418 Carbon Monoxide Hazard ...56 Carrying Cargo ...295 CAUTION, Explanation of ...iii Ceiling Light ...157 Center Pocket ...155 II 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 442
Assist System (ECON Assist) ...304 ECON Button ...124 ECON Mode ...124 Economy, Fuel ...290 Emergencies on the Road...385 Battery, Jump Starting ...396 Brake System Indicator ...63, 404 Changing a Flat Tire ...387 Charging System Indicator...63, 402 Checking the Fuses...407 INDEX III 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 443
Auto Idle Stop...66 Brake (Parking and Brake System) ...63, 404 Cruise Control ...69 Cruise Main ...69 Door/Hatch Open ...12, 68 DRL (Daytime Running Lights)...120 EPS (Electric Power Steering) .. 68 ECON Mode ...71 High Beam...69 High Temperature (Coolant) ...67 IMA Battery Level ...85 IMA System - 2010 Honda Insight | Owner's Manual - Page 444
Volt Battery Charging System...63, 402 VSA Off ...65 VSA System ...65 Infant Restraint ...43 Infant Seats LATCH Anchorage System ... ...17, 22 LATCH Anchorage System...47 Lights Bulb Replacement ...359 Indicator ...62 Parking ...118 Turn Signal ...118 ...119 CONTINUED INDEX V 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 445
...148 Parking Brake and Brake System Indicator ...63, 404 Parking Lights...118 R Radiator Overheating ...398 Radio/Disc/Sound System .. 166, 198 Radio Theft Protection...253 Readiness Codes ...403, 428 Rear Lights, Bulb Replacement ...365 O Octane Requirement, Gasoline ...284 VI 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 446
Wearing a Lap/Shoulder Belt ...17, 22 Seats, Adjusting the ...138 Security System ...255 Serial Number ...416 Service Intervals ...346 Service Manual ...435 Service Station Procedures ...285 Setting the Clock ...254 Shift Lever Position Indicators ...311 Shift Lock Release ...315 Side Airbags ...10 - 2010 Honda Insight | Owner's Manual - Page 447
...375 Inspection ...376 Maintenance ...377 Replacing ...378 Rotating...378 Service Life ...377 T Taillights, Changing Bulbs ...365 Taking Care of the Unexpected .. 385 Technical Descriptions DOT Tire Quality Grading ...420 Emissions Control Systems ...425 Oxygenated Fuels...284 State Emissions - 2010 Honda Insight | Owner's Manual - Page 448
356 Fluid Selection...356 Identification Number...417 Shifting the Automatic ...312 Treadwear ...377 Trip Meter ...78, 79 Turn Signals ...119 V Vanity Mirror ...156 Vehicle Capacity Load ...296 Vehicle Dimensions...418 Vehicle Identification Number...416 Vehicle Stability Assist (VSA ) System...332 - 2010 Honda Insight | Owner's Manual - Page 449
change capacity: 3.0 US qt (2.8 ) Brake Fluid: Honda Heavy Duty Brake Fluid DOT 3 preferred, or a DOT 3 or DOT 4 brake fluid as a temporary replacement (see page 357 ). Tire Pressure (measured cold): Front/Rear: 33 psi (230 kPa , 2.3 kgf/cm ) Spare Tire: 60 psi (420 kPa , 4.2 kgf/cm ) 2010 Insight - 2010 Honda Insight | Owner's Manual - Page 450
Owner's Identification OWNER This owner's manual should be considered a permanent part of the vehicle and should remain with the vehicle when it is sold. STREET ADDRESS This owner's manual covers all models of the Insight. You may find descriptions of equipment and features that are not on your
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
-
403
-
404
-
405
-
406
-
407
-
408
-
409
-
410
-
411
-
412
-
413
-
414
-
415
-
416
-
417
-
418
-
419
-
420
-
421
-
422
-
423
-
424
-
425
-
426
-
427
-
428
-
429
-
430
-
431
-
432
-
433
-
434
-
435
-
436
-
437
-
438
-
439
-
440
-
441
-
442
-
443
-
444
-
445
-
446
-
447
-
448
-
449
-
450
 |
 |
One of the best ways to enhance the enjoyment of your new vehicle is to
read this manual. In it, you will learn how to operate its driving controls and
convenience items. Afterwards, keep this owner’s manual in your vehicle so
you can refer to it at any time.
Several warranties protect your new vehicle. Read the warranty booklet
thoroughly so you understand the coverages and are aware of your rights
and responsibilities.
As you read this manual, you will
find information that is preceded by
a
symbol. This
information is intended to help you
avoid damage to your vehicle, other
property, or the environment.
Congratulations! Your selection of a 2010 Honda Insight was a wise
investment. It will give you years of driving pleasure.
Maintaining your vehicle according to the maintenance minder shown in the
instrument panel helps to keep your driving trouble-free while it preserves
your investment. When your vehicle needs maintenance, keep in mind that
your dealer’s staff is specially trained in servicing the many systems unique
to your vehicle. Your dealer is dedicated to your satisfaction and will be
pleased to answer any questions and concerns.
Introduction
i
2010 Insight