2010 Honda Insight Owner's Manual - Page 362
2010 Honda Insight Manual
Page 362 highlights
Lights Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the cargo area, readjustment may be required. Adjustments should be done by your dealer or another qualified technician. Replacing a Headlight Bulb Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. High Beam Headlight HOLDING CLIP CONNECTOR Maintenance Halogen headlight bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. 1. Open the hood. To change the bulb on the right side, remove the upper part of the windshield washer reservoir tank. Use a flat-tipped screwdriver to remove the holding clip, then remove the upper part by pulling it straight up. 2. Remove the electrical connector from the cover by pushing on the tab to unlock it, then slide the connector off the cover. 3. Remove the cover on the back of the headlight assembly by turning it counterclockwise. CONTINUED 359 2010 Insight