2010 Honda Insight Owner's Manual - Page 355
2010 Honda Insight Manual
Page 355 highlights
Changing the Oil and Filter 9. Reinstall the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5 seconds. If it does not, turn off the engine, and check your work. 10.Let the engine run for several minutes, then check the drain bolt and oil filter for leaks. 11.Turn off the engine, let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil. 12.Put the under-cover back in place and reinstall the holding clips and screws. Lock the clips securely by pushing on the center of each clip. Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground. 352 2010 Insight