2010 Jeep Grand Cherokee Owner's Manual - Page 100

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Easy Entry/Exit Seat This feature provides automatic driver's seat positioning which will enhance driver mobility out of and into the vehicle. driving position when the key is placed into the ignition, and turned out of the LOCK position toward the ACC/ON position. The Easy Entry/Exit feature will be automatically disThere are two possible Easy Entry/Exit adjustments abled if the seat is already positioned closer than 0.9 in (23 mm) forward of the rear stop. At this position, there available: is no benefit to the driver by moving the seat for Easy • The seat cushion will move rearward approximately Exit/Entry. 2.5 in (60 mm), if the starting position of the seat is greater than or equal to 2.67 in (68 mm) forward of the Each stored memory setting will have an associated Easy rear seat stop when the key is removed from the Entry/Exit position. ignition switch. The seat will then move forward NOTE: The Easy Entry/Exit feature is not enabled approximately 2.5 in (60 mm) when the key is placed when the vehicle is delivered from the factory. The Easy into the ignition and turned out of the LOCK position. Entry/Exit feature is enabled (or later disabled) through • The seat will move to the position located 0.3 in the programmable features in the Electronic Vehicle (8 mm) forward of the rear stop if the starting position Information Center (EVIC). Refer to "Electronic Vehicle is between 0.9 to 2.67 in (23 to 68 mm) forward of the Information Center (EVIC)/Customer-Programmable rear stop when the key is removed from the ignition Features" in "Understanding Your Instrument Panel" for switch. The seat will move forward to the memory/ further information. 3