2010 Jeep Grand Cherokee Owner's Manual - Page 174

UNDERSTANDING YOUR INSTRUMENT PANEL 173 will flash in the EVIC display for approximately 10 seconds after a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) refer to the following procedure. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Trip Functions Press and release the MENU button until one of the following Trip Functions displays in the EVIC: • Average Fuel Economy/Fuel Saver Mode • Distance To Empty • Trip A • Trip B 4 1. Turn the ignition switch to the ON position (Do not • Elapsed Time start the engine). • Service Distance 2. Fully depress the accelerator pedal, slowly, three times • Display Units of Measure In within 10 seconds. Press the SCROLL button to cycle through all the Trip 3. Turn the ignition switch to the OFF/LOCK position. Computer functions.