2010 Jeep Grand Cherokee Owner's Manual - Page 98
2010 Jeep Grand Cherokee Manual
Page 98 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 3. Adjust the driver's seat, recliner, and driver's sideview 10. Insert the ignition key, and turn the ignition switch to mirror to the desired positions. the ON position. 4. Adjust the brake and accelerator pedals to the desired 11. Select Remote Linked to Memory in the Electronic Vehicle Information Center (EVIC) and enter Yes . Refer positions. to "Electronic Vehicle Information Center (EVIC)/ 5. Turn on the radio and set the radio station presets (up Customer-Programmable Features" in "Understanding to 12 AM and 12 FM stations can be set). Your Instrument Panel" for further information. 6. Turn the ignition switch to the LOCK position and 12. Repeat the above steps to set the next memory remove the key. position, using the other numbered memory button, or to 7. Press and release the S (SET) button located on the link another RKE transmitter to memory. driver's door. Memory Position Recall 8. Within five seconds, press and release MEMORY NOTE: The vehicle must be in PARK to recall memory button 1 or 2 on the driver's door. The next step must be positions. If a recall is attempted when the vehicle is not performed within five seconds if you desire to also use a in PARK, a message will be displayed in the Electronic RKE transmitter to recall memory positions. Vehicle Information Center (EVIC). 9. Press and release the LOCK button on one of the RKE transmitters. 3