2010 Jeep Grand Cherokee Owner's Manual - Page 105
2010 Jeep Grand Cherokee Manual
Page 105 highlights
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate 1. Select "Auto High Beams." Refer to "Electronic Vehicle Information Center (EVIC)/Customer- NOTE: Broken, muddy, or obstructed headlights and Programmable Features" in "Understanding Your Instru- taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). ment Panel" for further information. Also, dirt, film, and other obstructions (sticker, toll box, 2. Turn the end of the multifunction lever to the AUTO etc.) on the windshield or camera lens will cause the headlight position. system to function improperly. 3. Push the multifunction lever away from you (toward Daytime Running Lights - If Equipped front of vehicle) to engage the high beam mode. The high beam headlights come on at a low intensity NOTE: This system will not activate until the vehicle is level whenever the engine is running, and the transmission is not in the PARK position. The lights will remain at or above 20 mph (32 km/h). on until the ignition switch is turned to LOCK/ACC or To Deactivate the parking brake is engaged. The headlight switch must 1. Pull back on the multifunction lever to manually be used for normal nighttime driving. deactivate the system (normal operation of low beams). 2. Push back on the multifunction lever once again to reactivate the system.