2010 Jeep Grand Cherokee Owner's Manual - Page 21

20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE cancel the arming. If the Vehicle Security Alarm success- Security Alarm. You may also accidentally disarm the fully arms, the Vehicle Security Light will flash at a Vehicle Security Alarm by unlocking the driver's door with the key and then locking it. The door will be locked slower rate to indicate the alarm is set. but the Vehicle Security Alarm will not arm. To Disarm the System To disarm the Vehicle Security Alarm, you will need to ILLUMINATED ENTRY press the UNLOCK button on the RKE transmitter or The interior lights come on when you open any door or turn the ignition key to the ON position. If something has use the Remote Keyless Entry (RKE) transmitter to untriggered the Vehicle Security Alarm in your absence, the lock any door. They will remain on for approximately horn will sound three times when you unlock the doors. 30 seconds after all doors are closed then fade to off. Check the vehicle for tampering. The lights also will fade to off if you turn on the ignition The Vehicle Security Alarm is designed to protect your after you close all the doors. vehicle; however, you can create conditions where the Vehicle Security Alarm will arm unexpectedly. If you REMOTE KEYLESS ENTRY (RKE) remain in the vehicle and lock the doors with the RKE This system allows you to lock or unlock the doors and transmitter, once the Vehicle Security Alarm is armed liftgate, or activate the panic alarm, from distances up to (after 16 seconds), when you pull the door handle to exit, approximately 66 ft (20 m) using a hand-held Key Fob the alarm will sound. If this occurs, press the UNLOCK with RKE transmitter. The RKE transmitter does not need button on the RKE transmitter to disarm the Vehicle to be pointed at the vehicle to activate the system.