1996 Nissan Quest Owner's Manual - Page 111
1996 Nissan Quest Manual
Page 111 highlights
TILTING STEERING WHEEL Integrated Child Safety Seat maintenance ● To clean the shoulder harnesses and belt buckle webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then brush the webbing, wipe it with a cloth and allow it to dry in the shade. Do not allow the shoulder harnesses to retract until they are completely dry. ● The integrated child safety seats cloth removable pads may be cleaned with mild soap and water. The cloth removable pads are attached to the seats with fastener strips, and may be easily removed. The pads are machine washable. Fo best results, machine wash in cold water in the gentle cycle. Tumble dry on low heat. Do not use chlorine bleach, and do not dry clean. CAUTION Failure to follow the washing instructions provided on the cloth removable pads may result in premature wear or damage. 2-78 ● Periodically inspect the belt and metal components of the integrated child safety seats, such as the buckles, tongues, shoulder harness webbings, and latching indicators. Periodically check the function of the integrated child safety seat shoulder harness retractor functions. If loose parts, deterioration, cuts, frays, malfunctions or other damage to the belt webbings or metal parts are found, see your NISSAN dealer for repairs. Inspection after an accident If your vehicle was involved in an accident, before using the integrated child safety seats, all related components should be inspected by a NISSAN dealer for damage. Damage to the integrated child safety seats or related components must be repaired. APD0812 Push the lock lever down and adjust the steering wheel up or down to the desired position. Pull the lock lever up firmly to lock the steering wheel in place. Gently pull down on the wheel to be sure it is properly locked. WARNING Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident.