1996 Nissan Quest Owner's Manual - Page 149

CRUISE CONTROL ASD0562 The cruise control allows driving at speeds between 30 and 90 MPH (48 and 144 km/h) without keeping your foot on the accelerator pedal. To turn the cruise control on, push the CRUISE CONT main switch. The indicator light on the switch comes on. To set at cruising speed, accelerate your vehicle to the desired speed, push the COAST/SET switch and release it. The CRUISE light in the instrument cluster comes on. Take your foot off the accelerator pedal. Your vehicle maintains the set speed. ● To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle returns to the previously set speed. ● The vehicle may not maintain the set speed when going up or down steep hills. If this happens, drive without the cruise control. To cancel the preset speed, follow any of these three methods: a) Push the CANCEL button; the CRUISE light goes out. 4-10 b) Tap the brake pedal; the CRUISE light goes out. c) Push the cruise control OFF switch. Both the ON indicator and CRUISE lights go out. ● If you depress the brake pedal while pushing the RES/ACCEL switch, the RES/ ACCEL function is cancelled. In order for the RES/ACCEL switch to operate, the COAST/SET must be used to re-engage the system. ● The cruise control automatically cancels if the vehicle slows down more than 8 MPH (13 km/h) below the set speed.