1996 Nissan Quest Owner's Manual - Page 164

tire placard affixed to the driver side center pillar. ● Retighten the lug nuts when the vehicle has been run for 600 miles (1,000 km) after installing the aluminum wheel. body supports. If necessary, loosen tire, reposition and retighten. WARNING ● Always make sure that the spare tire and jacking equipment are properly secured after use. Such items can become dangerous projectiles in an accident or sudden stop. ● The T-type spare tire is designed for emergency use. See specific instructions under the heading ''Wheels and tires'' in the ''Do-it-yourself operations'' section. ACE0016 5. Securely store the jacking equipment in the vehicle. The tool kit is stored behind the jack. Stowing the spare tire or flat tire 1. To raise the tire to the stowed position, install the retainer through the wheel center and turn the wheel lug wrench clockwise until the tire is raised to its original position underneath the vehicle. The spare tire hex nut ratchets when the tire is raised. It won't allow you to over-tighten. 2. Check for proper seating against under5-7