1996 Nissan Quest Owner's Manual - Page 119

1. Push the button in. Dehumidified defogging This mode is used to defog the windows and dehumidify. 1. Push the button in. 2. Turn the fan control dial to the desired speed. 3. Move the temperature control dial to the desired position. When the button is pushed, the air conditioner automatically turns on to defog the windshield, (however, the light does not illuminate unless illuminated in the previously selected mode) and the recirculated air mode automatically turns off. 2. Turn the fan control dial to select speed. 3. Push the air conditioner button. The indicator light comes on. 4. Move the temperature control dial to the desired position. ● For quick cooling when the outside temperature is high, push the air recirculation button on. Be sure to return the air recirculation button to the off position for normal cooling. ● Opening the windows helps to vent heat buildup when parked in the sun. operated for about ten minutes at least once a month. This helps prevent damage to the system due to lack of lubrication. ● If the coolant temperature gauge exceeds the H (hot) position, turn the air conditioner off. See ''If your vehicle overheats'' in the ''In case of emergency'' section for additional information. Dehumidified heating This mode is used to heat and dehumidify. 1. Push the air recirculation button to the off position. 2. Push the button in. 3. Turn the fan control dial to select speed. 4. Push on the air conditioner button. The indicator light comes on. 5. Move the temperature control dial to the desired position. Operating tips ● Keep windows and sun roof closed while the air conditioner is in operation. ● After parking in the sun, drive for two or three minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly. ● The air conditioning system should be 3-6