1996 Nissan Quest Owner's Manual - Page 125

The EATC heats the air if the selected temperature is warmer than the outside air coming into the vehicle. However, the air is not cooled regardless of the temperature setting. Push this button to get air from the floor and instrument panel registers at the same time. The indicator light comes on and the display window shows the set temperature. Depending on the selected temperature, the air is automatically heated or cooled. Push this button to direct airflow to the floor. The indicator light comes on, and the display window shows the set temperature. The air cannot be cooled in the mode, only heated. button to choose air recirPress the culation. In this mode the EATC system recirculates the air inside the vehicle rather than drawing air from outside. Use this mode together with the air conditioner to rapidly cool the inside of the vehicle, or to dehumidify the air inside the vehicle. AHA762 ENGLISH/METRIC MODE Switch from English to metric temperature display by simultaneously pressing the and A/C buttons and holding the thumbwheel in upper position (HI) for one second. AIR CONDITIONER AND AIR RECIRCULATION Activate the air conditioner in any of the override modes listed above by pressing the A/C button. The A/C indicator light comes on to verify activation, and cooled air flows from the vents. Fan speed continues to be controlled by the EATC unless the fan speed thumbwheel is used to override. 3-12