1996 Nissan Quest Owner's Manual - Page 66
1996 Nissan Quest Manual
Page 66 highlights
● Do not sit in seats that have been removed from the vehicle. They may tip over and you could be injured. 1. Lift up the recliner lever. 2. Fold the seatback fully forward. 3. Detach the single window tongue from the auxiliary buckle mounted to the side of the seat and store the tongue out of the way. (For detailed information, see ''Two buckle seat belt system for the second row bench seat'' later in this section.) 4. Unlock the seat legs at the two front floor latch levers. 5. Lift the front of the seat. 6. Slide it rearward off the rear anchor positions. APD0121 Installing the second row bench seat Clean the area around the seat leg floor anchors before installing the seat. 1. With the seatback fully folded, place the seat behind the floor anchors and catch the seat leg hooks into each floor anchor. 2. Push down on the front of the seat cushion to secure the two front floor latches. 3. Lift up the recliner lever and raise the seatback. 4. Rock the seat back and forth to be sure 2-33 all four seat legs are securely latched. 5. Insert the single window tongue into the auxiliary buckle mounted to the side of the seat.