2013 Nissan Pathfinder Owner's Manual - Page 104
2013 Nissan Pathfinder Manual
Page 104 highlights
Alarms This setting allows the customer to set alarms for outside temperature and a timer alert. 1. Press the button. 3. To change the timer amount, use the buttons and the ENTER button to save the selected time amount. Light Off Delay (if so equipped) The duration of the automatic headlights can be changed from 0 to 180 seconds. From the Vehicle Settings menu, select "Light Off Delay". Use the ENTER button to change the duration. Wiper with Speed The wiper with speed can be set to be ON or OFF. From the Vehicle Settings menu, select "Wiper with Speed". Use the ENTER button to turn this feature ON or OFF. I-Key Door Lock (if so equipped) From the Vehicle Settings menu, select "I-Key Door Lock". When this item is turned on, the request switch on the door is activated. When this item is turned off, the request switch on the door is deactivated. Use the ENTER button to activate this function. Selective-Unlock When this item is turned on, only the driver's door is unlocked first after the door unlock operation. When the door handle request switch on the driver's or front passenger's side door is pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the door unlock operation is performed again within 1 minute. When this item is turned to off, all the doors will be unlocked after the door unlock Vehicle Settings The vehicle settings allows the customer to change settings for interior lights, intelligent key settings, unlock settings and other vehicle settings. The vehicle settings can be changed using , , and the ENTER buttons. the Welcome light (if so equipped) The welcome light can be set to be ON or OFF. From the Vehicle Settings menu, select "Welcome Light". Use the ENTER button to turn this feature ON or OFF. Auto Room Lamp The interior lights can be set to be ON or OFF if any door is unlocked. From the Vehicle Settings menu, select "Auto Room Light". Use the ENTER button to turn this feature ON or OFF. Light Sensitivity (if so equipped) The light sensitivity can be set to illuminate earlier based on the brightness outside the vehicle. From the Vehicle Settings menu, select "Light Sensitivity". Use the ENTER button to change the sensitivity. 2. Use the button until "Settings" is selected, and press ENTER. 3. Select "Alarms" using the press ENTER. Outside Temperature This setting allows the customer to enable/disable the alert for low outside temperature in the vehicle information display. buttons to select "Outside 1. Use the Temperature". 2. Press the ENTER button to turn ON/OFF the outside temperature in the vehicle information display. Timer Alert This setting allows the customer to set an alert to notify the driver that the set time has been reached. 1. Use the Alert". buttons to select "Timer buttons and 2. Press the ENTER button. Instruments and controls 2-21