2013 Nissan Pathfinder Owner's Manual - Page 186

AUTOMATIC DRIVE POSITIONER (if so equipped) Move the shift selector to R (Reverse). The selected mirror will turn downward. The selected mirror surface will return to its original position when any of the following have occurred: ● The shift selector is moved to any position other than R (Reverse). ● The outside mirror control switch is set to the neutral or center position. ● The ignition switch is placed in the OFF position. NOTE: If the outside mirror control switch is in the neutral position, neither mirror will turn downward when the shift selector is moved to R (Reverse). For more information regarding this feature, refer to "Automatic drive positioner" in this section. LPD2113 The automatic drive positioner system has three features: ● Memory storage function ● Entry/exit function ● Seat synchronization function MEMORY STORAGE FUNCTION Two positions for the driver's seat, steering column, and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the memory system. 1. Set the Continuously Variable Transmission (CVT) shift selector to the P (Park) position. 2. Place the ignition in the ON position. 3. Adjust the driver's seat, steering column, and outside mirrors to the desired positions by manually operating each adjusting switch. For additional information, see "Seats" in the "Safety-Seats, seat belts and Heated mirrors (if so equipped) Some outside mirrors can be heated to defrost, defog, or de-ice for improved visibility. For additional information, see "Rear window and outside mirror defroster switch" in the "Instruments and controls" section of this manual. Pre-driving checks and adjustments 3-35