2013 Nissan Pathfinder Owner's Manual - Page 477
2013 Nissan Pathfinder Manual
Page 477 highlights
INSTALLING FRONT LICENSE PLATE Use the following steps to mount the front license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag: ● License plate bracket ● License plate bracket (J-nut) screws x 2 ● License plate screws x 2 ● Screw grommets x 2 1. Park the vehicle on flat, level ground. A as illustrated. 2. Locate the center position ᭺ Line up the license plate bracket under the B with the tabs ᭺ C. top of the front bumper ᭺ Hold the license plate bracket in place. D with a felt-tip 3. Mark the center of the hole ᭺ pen. 4. Carefully drill two pilot holes using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) 5. Insert the grommets into the holes in the bumper fascia. 6. Insert a small flat-bladed screwdriver into the grommet hole to turn the threaded part of E . the grommet 90° ᭺ LTI2039 9-12 Technical and consumer information