2013 Nissan Pathfinder Owner's Manual - Page 291

● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the USB device and the port. Make sure that the USB device is connected correctly into the USB port. (Some USB devices come with a mark as a guide. Make sure that the mark is facing the correct direction before inserting the device.) ● Do not locate objects near the USB device to prevent the objects from leaning on the USB device and the port. Pressure from the objects may damage the USB device and the port. The USB input jack is located in the center con1 . sole. Insert the USB device into the jack ᭺ When a compatible storage device is plugged into the jack, compatible audio and video files on the storage device can be played through the vehicle's audio system and center display screen. When there are both audio and movie files in the USB memory, the mode select screen is displayed. Use the touchscreen or the NISSAN controller to select the preferred type of file. When there is only type of file in the USB memory, that audio or movie operation screen is displayed and starts to play. When you play a file with limited playing time, the confirmation screen will be displayed before starting to play the file. Confirm the playing time and select "yes" to start playing. When the button is released, the audio file returns to normal play speed. SEEK/CAT and TRACK buttons: while an auPress the SEEK/CAT button dio file on the USB device is playing to return to the beginning of the current track. Press the several times to skip SEEK/CAT button backward several tracks. while an audio Press the TRACK button file on the USB device is playing to advance one several track. Press the TRACK button times to skip forward several tracks. If the last track in a folder on the USB device is skipped, the first track of the next folder is played. Folder selection: To change to another folder in the USB memory, turn the TUNE/FOLDER knob or choose a folder displayed on the screen. RPT/RDM button: When the RPT/RDM button is pressed while the USB memory is playing, the play pattern can be changed as follows: Normal → 1 Folder Repeat → 1 Track Repeat → All Random → 1 Folder Random → Normal Audio file operation DISC•AUX button: Place the ignition switch in the ON or ACC position and press the DISC•AUX button to switch to the USB input mode. If another audio source is playing and a USB memory device is inserted, press the DISC•AUX button repeatedly until the center display changes to the USB memory mode. If the system has been turned off while the USB memory was playing, push the ON-OFF/VOL control knob to restart the USB memory. SEEK/CAT and TRACK (Reverse or Fast Forward) buttons: Press and hold the SEEK/CAT (rewind) (fast forward) button for button or TRACK 1.5 seconds while an audio file on the USB device is playing to reverse or fast forward the track being played. The track plays at an increased speed while reversing or fast forwarding. 4-100 Monitor, climate, audio, phone and voice recognition systems