2013 Nissan Pathfinder Owner's Manual - Page 490

Wire color designation for electric trailer brake controller jumper harness. WIRE COLOR WHITE BLACK WHITE GREEN NOTE Vehicle stop lamp switch to trailer brake controller. Brake controller ground (-). Trailer brake controller switched output. Fused trailer brake controller battery feed (B+). LTI2045 LTI2046 3. Peel off the tape and connect the jumper harness to the connector . 4. Release the parking brake. 5. Install the aftermarket electric trailer brake controller according to the manufacturer's instructions. 2. Locate the jumper harness connector under the lower portion of the instrument panel. The connector is taped to the wiring harness 1 as indicated. ᭺ ● The connector is marked with a white tag with "elec brake conn". Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched. Do not drive the vehicle if it has an abnormal nose-up or nose-down condition; check for improper tongue load, overload, worn suspension or other possible causes of either condition. ● Always secure items in the trailer to prevent load shift while driving. Technical and consumer information 9-25