2013 Nissan Pathfinder Owner's Manual - Page 181

CAUTION For vehicles with automatic drive positioner: Failure to reset the tilt and telescoping functions of the steering wheel, after the vehicle's battery has been discharged, may prevent the steering wheel position from being adjusted. For vehicles with automatic drive positioner: Both the tilt and telescopic steering operation must be reset after the vehicle's battery has been discharged in order to prevent the tilt and telescopic operation from locking in one position. When the battery has been recharged or replaced, perform the following: ● For telescopic operation: Adjust the switch 1 so the steering wheel moves to the most ᭺ 3 that can forward and backward position ᭺ be reached. 1 so ● For tilt operation: Adjust the switch ᭺ the steering wheel moves to the highest 2 that can be reached. position ᭺ LPD2111 WPD0366 MANUAL OPERATION (if so equipped) Tilt and telescopic operation 1 down: Pull the lock lever ᭺ AUTOMATIC OPERATION (if so equipped) Tilt and telescopic operation 1 To adjust the steering wheel move the switch ᭺ in the following directions: ● Adjust the steering wheel forward or back3 to the desired position. ward in direction ᭺ ● Adjust the steering wheel up or down in 2 to the desired position. direction ᭺ ● Adjust the steering wheel forward or back3 to the desired teleward in direction ᭺ scopic position. ● Adjust the steering wheel up or down in 2 to the desired tilt position. direction ᭺ Performing these operations resets the range of the steering wheel's tilt and telescopic function. 1 up firmly to lock the Push the lock lever ᭺ steering wheel in place. 3-30 Pre-driving checks and adjustments