2013 Nissan Pathfinder Owner's Manual - Page 289
2013 Nissan Pathfinder Manual
Page 289 highlights
● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the USB device and the port. Make sure that the USB device is connected correctly into the USB port. (Some USB devices come with a mark as a guide. Make sure that the mark is facing the correct direction before inserting the device.) ● Do not locate objects near the USB device to prevent the objects from leaning on the USB device and the port. Pressure from the objects may damage the USB device and the port. The USB input jack is located in the center con1 . sole. Insert the USB device into the jack ᭺ When a compatible storage device is plugged into the jack, compatible audio files on the storage device can be played through the vehicle's audio system. press the AUX button repeatedly until the center display changes to the USB memory mode. If the system has been turned off while the USB memory was playing, push the ON-OFF/VOL control knob to restart the USB memory. SEEK/CAT and TRACK (Reverse or Fast Forward) buttons: (rewind) Press and hold the SEEK/CAT button or TRACK (fast forward) button for 1.5 seconds while an audio file on the USB device is playing to reverse or fast forward the track being played. The track plays at an increased speed while reversing or fast forwarding. When the button is released, the audio file returns to normal play speed. SEEK/CAT and TRACK buttons: while an auPress the SEEK/CAT button dio file on the USB device is playing to return to the beginning of the current track. Press the several times to skip SEEK/CAT button backward several tracks. LHA2475 USB INTERFACE (models without Navigation System) (if so equipped) Connecting a device to the USB input jack CAUTION ● Depending on size and shape of USB device, the console lid may not fully close. Do not force console lid closed as this may damage USB device. Audio file operation AUX button: Place the ignition switch in the ON or ACC position and press the AUX button to switch to the USB input mode. If another audio source is playing and a USB memory device is inserted, 4-98 Monitor, climate, audio, phone and voice recognition systems