2013 Nissan Pathfinder Owner's Manual - Page 105

operation is performed once. From the Vehicle Settings menu, select "Selective Unlock". Use the ENTER button to activate this function. Auto Door Unlock The auto door unlock function automatically unlocks all the doors when the shift selector lever is placed in the P (Park) position. From the Vehicle Settings menu, select "Auto Door Unlock". Use the ENTER button to enable/disable this function. Answer back horn When the answer back horn is on the horn will chirp and the hazard indicators will flash once when locking the vehicle with the Intelligent Key. Remote Start (if so equipped) The remote start function can be turned on or off. If the setting is OFF the vehicle cannot be started using the intelligent key. From the Vehicle Settings menu, select "Remote Start". Use the ENTER button to enable/disable. Battery Saver The battery saver automatically turns off the headlights after a period of time when the ignition switch is placed in the OFF position when the , or posiheadlight switch is in the tion. Exit Seat Slide When the Exit seat slide is ON the driver's seat will move backward for easy exit when the ignition switch is placed in the OFF position and the driver's door is opened. After getting into the vehicle and placing the ignition switch in the ACC position, the driver's seat will move to the previous set position. For more information for setting the seat position see "Automatic drive positioner" in the "Pre-driving checks and adjustments" section. Use the ENTER button to enable/disable this function. Exit steering up When the exit steering up is turned ON, the steering wheel moving upward for easy exit when the ignition switch is in the OFF position and the driver's door is opened. After getting into the vehicle and placing the ignition switch in the ACC position, the steering wheel moves to the previous position. For more information for setting the steering wheel position, see "Tilt and telescopic operation" in the "Pre-driving checks and adjustments" section. Use the ENTER button to enable/disable this function. Language The language of the vehicle information display can be changed to: ● US English ● French ● Spanish , , and the ENTER buttons to Use the select and change the language of the vehicle information display. The language of the center display/navigation can be changed independently of the vehicle information display. For vehicles not equipped with Navigation see "SETTING button:" and vehicles equipped with Navigation see, "System" in the "Monitor, climate, audio, phone and voice recognition systems" section of this manual. Units The units that are shown in the vehicle information display can be changed: ● Mileage ● Tire pressures ● Temperature 2-22 Instruments and controls