2015 Nissan Rogue Owner's Manual - Page 121

Automatic headlight aiming control (if so equipped) Vehicles with LED headlights may be equipped with an automatic levelling system. The headlight axis is controlled automatically. NISSAN recommends that you should consult the local regulations on the use of lights. WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. DAYTIME RUNNING LIGHT SYSTEM The daytime running lights automatically illuminate when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position position. Turn the headlight switch or in the position for full illumination when to the driving at night. If the parking brake is applied before the engine is started, the daytime running lights do not illuminate. The daytime running lights illuminate when the parking brake is released. The daytime running lights will remain on until the ignition switch is placed in the OFF position. LIC2637 Headlight beam select 1 ᭺ To select the high beam function, push the lever forward. The high beam lights come on light illuminates. and the Pull the lever back to select the low beam. Pulling and releasing the lever flashes the headlight high beams on and off. 2 ᭺ 3 ᭺ Battery saver system The battery saver automatically turns off the ignition after a period of time when the ignition switch is left in the ACC (if so equipped) or ON position. 2-36 Instruments and controls