2015 Nissan Rogue Owner's Manual - Page 326

ACTIVE ENGINE BRAKE The Active Engine Brake function adds subtle deceleration by controlling CVT gear ratio, depending on the cornering condition calculated from driver's steering input and plural sensors. This benefit is for easier traceability and less workload of adjusting speed with braking at corners. The Active Engine Brake also enhances braking feel by adding subtle deceleration with CVT gear ratio control according to driver's brake pedal operation LSD2185 When the Active Trace Control is operated and the "Chassis Control" mode is selected in the trip computer, the Active Trace Control graphics are shown in the vehicle information display. For additional information, refer to "Trip Computer" in the "Instruments and Controls" section of this manual. If the chassis control warning message appears in the vehicle information display, it may indicate that the Active Trace Control is not functioning properly. Have the system checked by a NISSAN dealer as soon as possible. WARNING The active trace control may not be effective depending on the driving condition. Always drive carefully and attentively. When the Active Trace Control is operating, you may feel a pulsation in the brake pedal and hear a noise. This is normal and indicates that the active trace control is operating properly. Even if the Active Trace Control is set to OFF, some functions will remain on to assist the driver (for example: avoidance scenes). The Active Engine Brake can be set to ON (enabled) or OFF (disabled) through the Vehicle Information Display "Settings" page. For additional information, refer to "Vehicle Information Display" in the "Instruments and Controls" section of this manual. Starting and driving 5-47