2015 Nissan Rogue Owner's Manual - Page 205

The air conditioner cooling function operates only when the engine is running. Ventilation This mode directs outside air to the side and center vents. button to change to fresh 1. Press the indicator light air intake mode. The will turn off. 2. Press the air flow control button. Rear window and outside mirror (if so equipped) defroster button For additional information, refer to "Rear window and outside mirror (if so equipped) defroster switch" in the "Instruments and controls" section of this manual. HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and the side vent outlets. button to change to fresh 1. Press the indicator light air intake mode. The will turn off for normal heating. 2. Press the air flow control button. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. position is selected, the air ● When the conditioner automatically turns on if the outside temperature is more than 36°F (2°C). This dehumidifies the air which helps defog indicator autothe windshield. The matically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. The recirculation mode cannot be activated position. in the Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. button to change to fresh 1. Press the air intake mode. The will turn off. 2. Press the air flow control button. Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. 1. Press the defrost/defog button . 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. ● To quickly remove ice or fog from the windows, turn the fan control dial to the highest setting and the temperature control to the full HOT position. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position between the middle and the hot position. Heating and defogging This mode heats the interior and defogs the windshield. 1. Press the air flow control button. 4-28 Monitor, climate, audio, phone and voice recognition systems